

Align T-Rex 550X White/Blue Fiberglass Painted Canopy
Product: | |
![]() | |
Product: | |
![]() | |
Laser Security Sticker: | |
![]() | |
Instruction: | Specification: |
●Use for T-REX 550X/550L. | ●GF painted canopy x 1 ●Canopy nut x 4(Φ7xΦ12x2.5mm) ●Canopy nut x 4(Φ2.7xΦ12x6mm) |
Type: | |
---|---|
Vendor: | |
SKU: |
HC5595T |
Weight: |
2.5 lb |
Product Spare Parts
Electronics
Was delivered in perfect condition. Thank you.
I realize my fingers are big, but with these canopies, and the position of the front holes, I find it better to reinforce the inside at the grommet holes with an additional layer of fibreglass, then drill out for the grommets to install. Also, the rubber grommets fit VERY tight on the mounting pins. Before putting them in the canopy, I drill the center hole with a 3/16” bit to remove some material. Takes some work, but makes battery changes easier. And, I don’t crack the paint around the holes.
Was delivered in perfect condition. Thank you.
I realize my fingers are big, but with these canopies, and the position of the front holes, I find it better to reinforce the inside at the grommet holes with an additional layer of fibreglass, then drill out for the grommets to install. Also, the rubber grommets fit VERY tight on the mounting pins. Before putting them in the canopy, I drill the center hole with a 3/16” bit to remove some material. Takes some work, but makes battery changes easier. And, I don’t crack the paint around the holes.