RCPROPLUS Pro-X6 Supra X Battery Connector - 6 Set (8-10AWG)

100% recomendado

Easiest connector I have ever soldered and very secure. Solid connection yet easy to disconnect.

Read the title lol

These connectors are incredible very very high-quality the best I’ve ever seen

i love these connectors... they stay cooler, are much easier to solder because of the little window in the bullet connector, and the connectors can easily be removed from an old battery and soldered on to a new one. I would give it 5 stars but i did find the plastic a little bit brittle, when tightening the screws be very careful not to over tighten. just snug them up and leave it alone, one 8th of a turn past that and it will crack the plastic but they are still usable and have had no issues. I'm converting all my packs to these connectors!

Very robust and precise connector.

First the positive attributes. These connectors are beefier than the EC5’s. The male bullets have a slight protrusion at the tip and emits an audible snap when the male bullet is inserted into the female connector. The connectors also have a soldering window which makes soldering easier. The plastic cover is easy to remove to allow cleaning carbon deposits off the male bullet contact surface.

The bad. There are currently no pre-made Supra charging cables, either single or parallel. So you have to purchased extra Supra connectors for your charging wires. This Supra connectors only come in full sets of 6 pairs. Ideally, these connectors should be available in "male only" and "female only”. Also, you cannot currently purchase the plastic covers separately. Functionally, the connectors are hard to pull apart.

There should also be an on-line manual to show what connectors and plastic covers to use on the batteries, ESC’s, charging wires, etc. in order to have these connectors be used universally consistent by all users.

First the positive attributes. These connectors are beefier than the EC5’s. The male bullets have a slight protrusion at the tip and emits an audible snap when the male bullet is inserted into the female connector. The connectors also have a soldering window which makes soldering easier. The plastic cover is easy to remove to allow cleaning carbon deposits off the male bullet contact surface.

The bad. There are currently no pre-made Supra charging cables, either single or parallel. So you have to purchased extra Supra connectors for your charging wires. This Supra connectors only come in full sets of 6 pairs. Ideally, these connectors should be available in ""male only"" and ""female only”. Also, you cannot currently purchase the plastic covers separately. Functionally, the connectors are hard to pull apart.

There should also be an on-line manual to show what connectors and plastic covers to use on the batteries, ESC’s, charging wires, etc. in order to have these connectors be used universally consistent by all users.

These are an excellent product. They are easy to solder and and cases are removable so they can be resused if you puff a battery or reach the cycle life of one. You do have to pay attention to what you are connecting too. BE WARNED. There is nothing to keep you from reverse polarity connection. It is in your best interest to always use red for positive and black for negative.

First the positive attributes. These connectors are beefier than the EC5’s. The male bullets have a slight protrusion at the tip and emits an audible snap when the male bullet is inserted into the female connector. The connectors also have a soldering window which makes soldering easier. The plastic cover is easy to remove to allow cleaning carbon deposits off the male bullet contact surface.

The bad. There are currently no pre-made Supra charging cables, either single or parallel. So you have to purchased extra Supra connectors for your charging wires. This Supra connectors only come in full sets of 6 pairs. Ideally, these connectors should be available in "male only" and "female only”. Also, you cannot currently purchase the plastic covers separately. Functionally, the connectors are hard to pull apart.

There should also be an on-line manual to show what connectors and plastic covers to use on the batteries, ESC’s, charging wires, etc. in order to have these connectors be used universally consistent by all users.