The Powerbox Pioneer Mount is a must-have accessory for all Powerbox users flying RC Gas Turbine Aircraft. With its secure mounting design, your Powerbox Pioneer will stay in place during the most turbulent of rides. Increase your efficiency and peace of mind with this...

Our Powerboat PBS Dock mount is expertly designed to securely fix the PBS Dock  to your RC Gas Turbine Jet or Airplane airframe. The PBS-DOCK mount can be attached to the airframe with double-sided tape. The dock will snap securely into the mount.

Receiver Mount for the Powerbox PBR-26X receiver. Securely affix the Powerbox PBR-26D to any RC Gas Turbine Aircraft. The receiver clips into the mount, which can be secured to the airframe using double-sided tape (not included).

Receiver Mount for the Powerbox PBR-26D Receiver. Securely affix the Powerbox PBR-26D to any RC Turbine Aircraft. The receiver clips into the mount. May be mounted with screws or double sided tape.

Mount for the Powerbox GPS III. Expertly mount your Powerbox GPS into your radio control gas turbine aircraft.  Securely attach your GPS with this professional-grade mount, designed for precise placement and lasting stability. 

Battery Tray for the Jet Central 3S 3800 Life Battery Pack. May be screwed into place or attached with double sided tape.  Designed to securely mount the battery to rc gas turbine aircraft. Printed in PETG.

RC Gas Turbine Jet fuel line holder. Expertly designed for convenience and efficiency, our 3D printed RC Jet Fuel Line Holders are perfect for fuel line routing. Say goodbye to tangled lines and your turbine installations. These are double side by side. Available in...

UAT mount for the composite Boomerang RC 180cc UAT's. Securely mount the Boomerang UAT in your RC Gas Turbine Aircraft with confidence. Mount clamps over the UAT with 2.5mm screws and nuts (provided). Set of 2

Screen Connection mount with a 200mm extension for use with Advanced Radio, Booma RC systems. This mount and extension will allow easy connection of the AR screen for those who do not want to mount the screen into the airframe.  Works with all Advanced...

Easily mount your T-Switch to your RC Gas or Turbine Aircraft's airframe with this custom mount designed for the Advance Radio Dual Battery T-Switch with Telemetry. The cap snaps into place without the need for screws, and you can secure it further with double-sided...

4 pin Smart Screen Extension, Compatible with Smartbus, Smoothflite and Smoothflite systems.

SizeMini Nominal width1.6 mm Tubing insertion depth9.5 mm Mounting positionAny DesignT-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ......

Outside diameter:  3 mm Inside diameter:  2.1 mm

Outside diameter: 8 mm Inside diameter: 5.7 mm

Nominal width1.5 mm Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating and pilot mediaOperation with oil lubrication possible (required for further use) LABS (PWIS) conformityVDMA24364-B1/B2-L Pneumatic connection 1for pneumatic tubing outside diameter 3 mm Note on materialsRoHS-compliant Housing materialPOM

SizeMini Nominal width1.7 mm Tubing insertion depth11.6 mm Mounting positionAny DesignY-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ......

SizeMini Nominal width1.6 mm Tubing insertion depth11.6 mm Mounting positionAny DesignY-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ......

SizeMini Nominal width2.9 mm Tubing insertion depth11.9 mm Mounting positionAny DesignY-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ......

SizeMini Nominal width2.4 mm Tubing insertion depth11.6 mm Mounting positionAny DesignT-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ......

Nominal width5.3 mm Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating and pilot mediaOperation with oil lubrication possible (required for further use) LABS (PWIS) conformityVDMA24364-B1/B2-L Pneumatic connection 1for pneumatic tubing outside diameter 8 mm Note on materialsRoHS-compliant Housing materialPOM