Includes: - RDT Unit x 1pc Used for: - Xicoy X turbines    

Heavy duty Jet fuel fitting clunk with .1875 (3/16) I.D. hole. Measures 2.25" x .5" dia. Weighs 1.5 oz.

S0031-S - Rigid Vertical Rudder If you want same number on the body, please add NOTE on the order, thank you. Includes 2 x Rigid Vertical Rudder. Use for: KR84 Tortuga

The Dry Break Connector Flush Mount for Kent Systems from Approach RC Concepts is a purpose-built mounting solution that securely affixes Kent Systems dry break connectors without the need pf removing the fuel line. Designed for RC planes and other fuel-powered models, it keeps...

Pass Through Grommet 12 x 25mm (2 per package) is a PETG-printed pass-through grommet designed for RC jets and airplanes. It protects wiring and fuel lines in radio-controlled gas turbine aircraft, and comes in a convenient 2-pack. Features Size: 12 x 25 mm per...

Filter mount for the Kingtech RC gas turbine fuel filters. The filter is held in the mount with the provided zip ties. Mount includes two small sheet metal screws for mounting into the fuselage.  

Valve function2/2 bistable Pneumatic connection 1QS-6 Pneumatic connection 2QS-6 Actuation typeManual Type of mountingLine installation Normal nominal flow rate (normalized to DIN 1343)533 l/min Nominal width4 mm Operating pressure-0.1 MPa ... 1 MPa Operating pressure-1 bar ... 10 bar Ambient temperature0 °C ... 60...

SizeStandard Tubing insertion depth15 mm Mounting positionAny DesignBlanking plug Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ... 87 psi...

Nominal width3.4 mm Operating pressure for entire temperature range-0.095 MPa ... 1 MPa Operating pressure for entire temperature range-0.95 bar ... 10 bar Operating pressure for entire temperature range-13.775 psi ... 145 psi Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating...

SizeMini Nominal width2.2 mm Tubing insertion depth11.5 mm Type of seal on screwed plugSealing ring Mounting positionAny DesignStraight design Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar...

K-260G5 SPECIFICATIONS Diameter: 120mm / 4.72” Length: 299mm / 11.77” Weight: 2200g / 4.85lb Maximum RPM: 112,000RPM Max Thrust: 26kg ±0.5 ( 57lb ) EGT: 750°C max Pump type: Digital sbus brushless pump KP1000DP Battery:11.1v Lipo ( At least 2200mah 35C ) Start time:...

K-180G5 SPECIFICATIONS Diameter: 103mm / 4.05” Length: 251mm / 9.88” Weight: 1540g / 3.39lb Maximum RPM: up to 130000 Thrust: 18kg @ 15°C / 40 lb @ 59°F EGT: 700°C max Pump type: Digital sbus brushless pump KP600DP Battery:11.1v Lipo ( At least 2200mah 35C )...

2M x 600mm roll of genuine Oracover 21-091 Silver covering used on Boomerang RC Jets

2M x 600mm roll of genuine Oracover 21-071 Black covering used on Boomerang RC Jets

2M x 600mm roll of genuine Oracover 21-052 Dark Blue covering used on Boomerang RC Jets

2M x 600mm roll of genuine Oracover 21-010 White covering used on Boomerang RC Jets

Includes: - RDT Unit x 1pc Used for: - Jet Central SE turbines    

Includes: - RDT Unit x 1pc Used for: - Xicoy V10 (Merlin, Kingtech G1, Jetcentral pre-SE, ATJ and more)    

Protect your Turbinator 2 wings with PennBags!  Double protection with a heavy duty quilted outside, with soft flannel on the inside! PENNBAGS ARE MADE IN THE USA!    

Replace canopy for Elan V2 Black Colorcategory-jets,category-jets-brand-boomerang-rc-jets,category-jets-brand-boomerang-rc-jets-model-elan-v2,category-jets-brand-boomerang-rc-jets-model-elan-v2-model-elan-v2