Includes: Lizard Rudder Servo Support x 1 Set Use for: M138 Lizardcategory-jets,category-jets-brand-sab-avio,category-jets-brand-sab-avio-model-lizard,category-jets-brand-sab-avio-model-lizard-model-lizard

S0040-S - Rudder Kit If you want same number on the body, please add NOTE on the order, thank you. Includes: 2 x Movement Vertical Rudder 2 x Uniball M2 Maschio 2 x Threaded Rod M2 x 56 6 x Torx Screw Self Tapping...

S0036-S - Wing Servo Mount Includes: 2 x Wing Servo Mount 2 x Aileron Horn Used for: KR84 Tortuga S0036-S - Wing Servo Mount Includes: 2 x Wing Servo Mount 2 x Aileron Horn Used for: KR84 Tortuga

S0021-S - Canard Servo Mechanics Includes: 2 x Plastic Ball Link M2 2 x Uniball M2 maschio 1 x Linkage M2x22 2 x Socket M3 x 8 1 x Canard Servo Mechanics 1 x Spacer Used for: KR84 Tortuga S0021-S - Canard Servo Mechanics...

The Dry Break Connector Flush Mount for Kent Systems from Approach RC Concepts is a purpose-built mounting solution that securely affixes Kent Systems dry break connectors without the need pf removing the fuel line. Designed for RC planes and other fuel-powered models, it keeps...

Smart Phone RC Throw and Deflection Gauge is a precision tool for RC enthusiasts designed to safely and easily leverage the built-in smartphone levels for accurate control-surface setup on remote control planes and other RC models. The holder securely clamps onto the control surface, while...

Pass Through Grommet 12 x 25mm (2 per package) is a PETG-printed pass-through grommet designed for RC jets and airplanes. It protects wiring and fuel lines in radio-controlled gas turbine aircraft, and comes in a convenient 2-pack. Features Size: 12 x 25 mm per...

This is a Custom-built wiring harness specifically for the ATOM by Hemming Aviation.

Our IGyro mount is expertly designed to securely fix an IGyro sensor to your RC Gas Turbine Jet or Airplane airframe. The iGyro mount can be attached to the airframe with screws or double-sided tape.

Designed to replace the pitot tube probes on Radio Control Gas Turbine Jets for transport allowing the nose cone to remain firmly in place. Expertly designed, the flag ring does swivel allowing the remove before flight flag to hand down freely. Removing the nose...

RC Gas Turbine Jet fuel line holder. Expertly designed for convenience and efficiency, our 3D printed RC Jet Fuel Line Holders are perfect for fuel line routing. Say goodbye to tangled lines and your turbine installations. These are double side by side. Available in...

Fuel Line Holder. Expertly designed for convenience and efficiency, Our 3D printed Fuel Line Holder is perfect for fuel line routing. Say goodbye to tangled lines and your turbine installations. Available in 4mm and 6mm sizes Sized to fit 4mm and 6mm Festo Tubing...

E100 Turbine Compact and powerful 102N turbojet engine with 154,000 RPM max speed, 950g weight, mobile app tuning, and multi-protocol telemetry support—designed for high-performance RC jets.    Specification: Diameter: 90 mm Length: 205 mm Weight: 950 g RPM: 42,000 – 154,000 Idle Thrust: 4 N Max Thrust: 102 N...

ominal width2.5 mm Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating and pilot mediaOperation with oil lubrication possible (required for further use) LABS (PWIS) conformityVDMA24364-B1/B2-L Pneumatic connection 1for pneumatic tubing outside diameter 4 mm Note on materialsRoHS-compliant Housing materialPOM

SizeMini Nominal width3.4 mm Tubing insertion depth12 mm Mounting positionAny DesignL-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ......

Nominal width5.3 mm Operating pressure for entire temperature range-0.095 MPa ... 1 MPa Operating pressure for entire temperature range-0.95 bar ... 10 bar Operating pressure for entire temperature range-13.775 psi ... 145 psi Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating...

SizeStandard Mounting positionAny DesignBlanking plug Pack size10 Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ... 87 psi Temperature-dependent operating pressure-0.095 MPa ... 1.4 MPa...

SizeStandard Mounting positionAny DesignBlanking plug Pack size10 Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi ... 87 psi Temperature-dependent operating pressure-0.095 MPa ... 1.4 MPa...

Nominal width2.7 mm Operating pressure for entire temperature range-0.095 MPa ... 1.2 MPa Operating pressure for entire temperature range-0.95 bar ... 12 bar Operating pressure for entire temperature range-13.775 psi ... 174 psi Normal nominal flow rate (normalized to DIN 1343)88 l/min ... 139...

SizeMini Nominal width2.1 mm Tubing insertion depth11.9 mm Type of seal on screwed plugSealing ring Mounting positionAny DesignL-shape Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating...