INJORA INJS2065 7KG 2065 Digital Servo Waterproof High Voltage Micro Shift Servo For 1/10 RC Crawler Car SCX10 III TRX4 TRX6Suit for: 1/10 Axial SCX10 III 1/10 TRX-4 TRX-6 etc. Features: IP66 waterproof ratings, you can run it in the rain or underwater! High voltage and digital 2065...

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears.  1. Made of aluminum alloy and brass. Surface anodized. Front axle 85G. 2. lsometric three-section CVD: No jerks when turning at large angles. Maximum steering angle 52°....

INJORA 51mm Aluminum Long Travel Threaded Double Barrel Shocks for Axial AX24 Suit for 1/24 scale mini rc crawlers, such as: Axial AX24Features: CNC-machined Aluminum shock bodies Double Barrels Shock Telescopic design for maximum travel Long travel shocks for the AX24/SCX24 are ready for anything...

🔥 Furitek SlideVolt Combo Crimson Gold Edition 1/10 Drift 🔥 🚀 Precision. Power. Innovation. The all-new Furitek SlideVolt Combo brings together the best of drift technology, combining the cutting-edge Furitek SlideTech 1/10 Sensored ESC and the Furitek Voltmaster 10.5T Sensored Brushless Drift Motor, all wrapped in the exclusive Crimson Gold Edition. This...

Features:1.Made of high-quality aluminum alloy,CNC machining;2.Black red snodized,high precision and easy installation;3.Effectively protect the chassis.4.Upgrade for Axial SCX24, replace original plastic parts.Material: Aluminum AlloyWeight: 7g / 0.25ozColor: Black

HobbyPlus Mount & Link set Use For CR18P EVO PRO

MEUS Racing Titanium LCG Chassis MD24 Dig Chassis with Dig Unit, MD24 Chassis with Carrier Bearing for Axial 1/24 SCX24 RC Crawler Upgrades. MD24 Chassis Key Features: 1. Made of TC4 Titanium, with greater strength and durability. 2. 20° angled chassis, POM skid plate,...

What's Included: Front Tires w/foam inserts Premounted x 2 Rear Tires w/foam inserts Premounted x 2

Features Improved top speed / Precision response / High efficiency with the cool operation When used with the EzRun Mini28 ESC, timing advance can be used to increase top speeds drastically. Zero cogging, consistent torque, and excellent low-speed response give an amazing feel and...

  Introducing the Furitek UNITY PRO 2in1 FOC Brushless System with receiver combo for Redcat Ascent-18 We are thrilled to unveil the Furitek UNITY PRO, the pioneering 2-in-1 brushless system tailored for 1/24 and 1/18 scale RC crawlers. As a leader in electronics for...

Description: For MJX 16207 16208 16209 16210  RC Car. Meterial: plastic Package Included: 1x set

INJORA 180 PRO Brushed 48T Motor with Stainless Steel Pinion for 1/18 RC Crawler TRX4M Upgrade (INM11)Note: While providing more torque, this motor will also increase the speed Not waterproof Suit For: 1/18 Traxxas TRX4MFeatures: Extremely high-strength neodymium magnets Stronger drag brake and torque...

INJORA Axle Worm Gear Set for 1/30 Axial SCX30 (2/13T, 2/16T) 2/13T Overdrive Ratio: Increases speed by approx 23%2/16T Ratio: Same as stock, does not change the speed Features: Made from stainless steel for excellent durability and corrosion resistance Available in 2/13T and 2/16T...

INJORA Aluminum Transmission Kit for 1/30 Axial SCX30 (Assembly Required) Notes: Assembly is required. Apply appropriate grease to the gears during assembly. Skid plate is not included, allowing builders to choose aluminum or brass options based on build preference. Features: CNC-machined aluminum gearbox housing...

MEUS Racing ME25 25A Brushed Mini ESC for 1/24 Axial SCX24, AX24, FCX24, 1/18 TRAXXAS TRX4M, Redcat Ascent-18 RC Crawler. Key Features 1. Compatible with 030/050/180/370 brushed motors with these plugs: TRX4M, JST-PH 2.0 2. Compatible with 2-3S lipo batteries with these plugs: JST-PH...

Specifications:- Hex Size: 7mm- Hex Pin Size: 1.5mm- Weight: TBDWhat's Included:- +10mm Axles x 4- 1.5mm Solid Pins x 4- Brass Hexes x 4 Features:- Brass Hexes for Increasing Weight while Decreasing COG (Center of Gravity)- +10mm Axles     - Increases Track Width for...

- INNOVATIVE DESIGN- XTS-F10 Rally Car is Rlaarlo's flagship 1/10 scale model, celebrating its 3rd anniversary. With three iterations of upgrades, it blends high-fidelity design and outstanding performance. Synchronized lighting and intricate details enhance its visual appeal, while the powerful motor enables it to...

L(min) = 26.5mm L(max) = 31.7mm Support: FX132 MT ETNA 1/32 

Features:1.CNC maching and anodizing,beautiful appearance.2.Aluminum gearbox housing,hardened steel internal gears.3.Helps prevent dirt and debris from entering the pinion and spur gears for a quiet and efficient drivetrain.4.Suitable for SCX24 Deadbolt AXI90081,B17 AXI00004,C10 AXI00001 AXI00002,JLU,Ford Bronco AXI00006,Jeep Gladiator AXI00005.Weight:20gColor:Black/Red/Silver

Description : - Use for for CR18P EVO/ EVO PRO -  Rear Axle Drive Shaft