INJORA 0.7" D18 Aluminum 5-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7002) Note: Designed and tested for use with INJORA 0.7" tires! Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and...

INJORA 0.7" D18 Aluminum 6-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7001) Note: Designed and tested for use with INJORA 0.7" tires! Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and...

INJORA 1.3" Aluminium Beadlock Wheels, Negative Offset, for 1/24 1/18 RC Crawler (W1309) Features: CNC aluminium machined Matte Black anodized Negative offset offers wider spacing, enhance stability and overall performance 1.3" wheel will set you ahead of the curve with performance and looks Specifications:...

INJORA Aluminum N30 NANO Servo with Servo Saver for 1/30 Axial SCX30 Features: CNC-machined aluminum servo case for added strength and durability Metal gear set built to handle higher steering loads Higher torque output than the stock servo for stronger steering performance Spring-loaded servo...

INJORA Axle Worm Gear Set for 1/30 Axial SCX30 (2/13T, 2/16T) 2/13T Overdrive Ratio: Increases speed by approx 23%2/16T Ratio: Same as stock, does not change the speed Features: Made from stainless steel for excellent durability and corrosion resistance Available in 2/13T and 2/16T...

INJORA Black Coating Brass Steering Knuckles for 1/30 Axial SCX30 Features: CNC-machined brass for precise fit, strength, and corrosion resistance Adds weight to the front axle for improved climbing stability and overall vehicle control Simple, direct-replacement installation with no modifications required Black-coated brass finish...

INJORA Black Coating Brass Steering Links for 1/30 Axial SCX30 Features: CNC-machined brass for precise fit, strength, and corrosion resistance Adds weight to the front axle for improved climbing stability and overall vehicle control Simple, direct-replacement installation with no modifications required Black-coated brass finish...

INJORA MBL32-NANO Brushless ESC for 1/30 Axial SCX30 Note: Pre-configured and ready to run. No programming required. USB programmer card is not included. For use with INJORA brushless motors only. Damage caused by using other motors is not covered under INJORA warranty. Please use...

INJORA Stainless Steel CVD Axle Shafts for 1/30 Axial SCX30 Features: Stainless steel construction for improved wear resistance and durability Upgraded front axle CVD design to replace the stock dogbone-style axle shafts Extended axle shaft threads by 1 mm allow the installation of wider...

INJORA Stainless Steel Center Drive Shafts for 1/18 HPI Venture 18Compatible with: 1/18 HPI Venture 18Features: Made of stainless steel, in phase design Enhanced structure for long-life durability Scale Joint and spline diameter size for realistic appearance D-Shaped hole desgin offer tighter connection to...

Features: 1.Made of steel,CNC hardened steel structure，sturdy and durable. 2.There are lengths in total, 3 combinations:Type A: for SCX24 Deadbolt AXI90081 ，B17 AXI00004. Type B:for SCX24 C10 AXI00001 AXI00002, JLU,Ford Bronco AXI00006.Type C:for SCX24 Gladiator AXI00005.Size and weight：A: 34-40MM+56-81MM；20GB: 45-58MM+56-81MM；21G C: 45-58MM+69-95MM；23GThe package includes:2*drive...

Features: 1.Made of steel,CNC hardened steel structure，sturdy and durable. 2.There are lengths in total, 3 combinations:Type A: for SCX24 Deadbolt AXI90081 ，B17 AXI00004. Type B:for SCX24 C10 AXI00001 AXI00002, JLU,Ford Bronco AXI00006.Type C:for SCX24 Gladiator AXI00005.Size and weight：A: 34-40MM+56-81MM；20GB: 45-58MM+56-81MM；21G C: 45-58MM+69-95MM；23GThe package includes:2*drive...

Features: 1. Made of high quality steel to increase wear resistance and extend service life;  2.Precision CNC machined steel structure, stable and durable;  3.Perfectly match the original gearbox, easy to install; 4. Reduction ratios: 25.87:1(underdrive 36% ) 5.Motor Gear:11T 6.Package includes: gear*4; 3×6× 2.5 bearing*6; 3×16...

MEUS Racing 0.7-inch Beadlock Wheels Rims Deep-Dish Wheel for 1/30 Axial SCX30 1/32 Redcat Ascent-32 RC Crawler Upgrades. The hex hub adapter in the package is for the Axial SCX30 crawler, while the Redcat Ascent-32 Redcat Ascent-32 and other micro crawlers using a 5mm...

MEUS Racing 0.7-Inch Tires MS6 Super Soft Tires for 1/30 Axial SCX30 1/32 Redcat Ascent-32 RC Crawlers. #M0701 MS6 Lucky 7S Crawler Tires Features: 1. Made of super soft & sticky MS6 White-Dot compound from MEUS Racing. 2. Comes with Large-spaced patterns arranged in...

MEUS Racing 1.0-inch RC Rubber Tire Set 4 Pcs MS6 RC Tire For 1/18 TRX4M 1/24 SCX24 FCX24 AX24 RC Micro Crawlers. Key Features: 1. Made of super soft & sticky MS6 White-Dot compound from MEUS Racing. 2. Comes with three different types of...

MEUS Racing 1.0-inch RC Rubber Tire Set 4 Pcs MS6 RC Tire For 1/18 TRX4M 1/24 SCX24 FCX24 AX24 RC Micro Crawlers. Key Features: 1. Made of super soft & sticky MS6 White-Dot compound from MEUS Racing. 2. Comes with three different types of...

Description:  1. Tires are made of high quality rubber with foam inserts for excellent traction and grip. Wheels are made of brass CNC machined. Single wheel 77G . 2. Negative Bias: -4MM Negative Bias wheels keep the wheels away from the center of the...

MEUS Racing 1.3" Tires MS6 Super Soft & Sticky Rubber Tires for 1/18 TRX4M 1/24 SCX24 FCX24 AX24 RC Crawlers. Key Features: 1. Made of super soft & sticky MS6 White-Dot compound from MEUS Racing. 2. Aggressive side lug design provides improved side-bite on...

MEUS Racing 1.9 Inch MS6 Super Bouncer Soft & Sticky Rubber Tires for 1/10 SCX10 Capra 1.9 UTB TRX4 Redcat Gen8 RC Crawlers. Key Features: 1. Made of super soft & sticky MS6 Orange-Dot compound from MEUS Racing. 2. Aggressive side lug design provides...