MEUS RACING Ascent 18 Servo Mount for Redcat Ascent-18 1/18 RC Crawler Upgrades Parts. Key Features: Provide extra weight and lower the center of gravity. Easy to Install: Replace the stock plastic parts Made of high-quality aluminum alloy for greater hardness and durability. Precisely...

INJORA INJS2065 7KG 2065 Digital Servo Waterproof High Voltage Micro Shift Servo For 1/10 RC Crawler Car SCX10 III TRX4 TRX6Suit for: 1/10 Axial SCX10 III 1/10 TRX-4 TRX-6 etc. Features: IP66 waterproof ratings, you can run it in the rain or underwater! High voltage and digital 2065...

Furitek SlideTech PRO 1/10 Sensored ESC w/ OLED & Internal Fan – Drift & Stock Racing – RED Edition 🚀 Precision. Power. Innovation – Evolved. The all-new Furitek SlideTech PRO 1/10 Sensored ESC w/ OLED & Internal Fan is engineered for peak drift and stock racing...

MEUS Racing SCX30 Driveshaft Metal Front Rear Drive Shafts for 1/30 Axial SCX30 RC Crawler Upgrades. Key Features: 1. CNC machined with exquisite appearance, greater hardness, and durability. 2. Adjustable length design, the short one is 26mm to 30mm adjustable, the long one is...

MEUS RACING 1/10 Nylon Isokinetic Straight Axles with Front Axle Counterweight for Axial Capra II SCX10 II and Other DIY 1/10 RC Crawler. Key Features: 1. MEUS RACING 1/10 Nylon Isokinetic Straight Axles with Front Axle Counterweight for Axial Capra 1.9 UTB, AR44, AR45...

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears. The rear axle uses a 2-14T gear that is used with both stock and aftermarket gears. The 2-16T gears included in the package can only be installed...

🔥 Furitek NANODRIVE 380 – 10.5T Sensored Brushless Drift Motor (Purple Edition)⚡ THE GAME CHANGER FOR 1/10 RC DRIFT 🚨 This is not just another motor – it’s a revolution for 1/10 drift cars. Introducing the Furitek NANODRIVE 380, the world’s first ultra-lightweight 380-size sensored brushless motor designed to mount directly into...

MEUS Racing 1.0-inch RC Rubber Tire Set 4 Pcs MS6 RC Tire For 1/18 TRX4M 1/24 SCX24 FCX24 AX24 RC Micro Crawlers. Key Features: 1. Made of super soft & sticky MS6 White-Dot compound from MEUS Racing. 2. Comes with three different types of...

🖤 Furitek VoltEagle 1/10 Drift Combo – Midnight Edition (Plug & Play Brushless Sensored System for Traxxas 4-Tec Drift) Unleash the full drift potential of your Traxxas 4-Tec with the Furitek VoltEagle Drift Combo – Midnight Edition. This high-performance Plug & Play combo combines the ultra-smooth Furitek EagleTech sensored...

MEUS Racing SCX24 Metal Isokinetic Front and Rear Axles with 3-Section CVDs and 52° Maximum Steering Angle +5mm wider for 1/24 SCX24 Deadbolt C10 JLU Gladiator Bronco. Key Features: 1. The silver and gold axle housing surfaces are chrome-plated, the blue and purple are...

INJORA Axle Worm Gear Set for 1/30 Axial SCX30 (2/13T, 2/16T) 2/13T Overdrive Ratio: Increases speed by approx 23%2/16T Ratio: Same as stock, does not change the speed Features: Made from stainless steel for excellent durability and corrosion resistance Available in 2/13T and 2/16T...

Furitek DOMINATOR 150A 1/10 Sensored Brushless ESC – 2S to 4S LiPo – for 1/16 & 1/10 RC Bashers Designed for 1/16 & 1/10 RC Bashers – Raw Power Meets Intelligent Control The FURITEK DOMINATOR 150A ESC is a state-of-the-art brushless sensored ESC built for high-performance 1/16 and...

INJORA Stainless Steel Center Drive Shafts for 1/18 HPI Venture 18Compatible with: 1/18 HPI Venture 18Features: Made of stainless steel, in phase design Enhanced structure for long-life durability Scale Joint and spline diameter size for realistic appearance D-Shaped hole desgin offer tighter connection to...

Furitek MicroFlex 4WS TX/RX Combo Description: The Furitek MicroFlex 4WS TX/RX Combo is designed specifically for micro and mini crawler enthusiasts who demand precision and convenience. With a dedicated knob for rear steer control, drivers can now handle tight turns and tricky terrain with just one...

INJORA MBL32-NANO Brushless ESC for 1/30 Axial SCX30 Note: Pre-configured and ready to run. No programming required. USB programmer card is not included. For use with INJORA brushless motors only. Damage caused by using other motors is not covered under INJORA warranty. Please use...

MEUS Racing Steel CVD Shaft Axle Shafts for 1/30 Axial SCX30 RC Crawler Upgrades. Key Features: 1. Made of high-quality steel for greater hardness and durability. 2. Upgraded CVD design to replace the stock dogbone-style axle shafts. 3. CVD shafts can provide smoother movement...

Note: The front axle uses custom 2-14T gears that do not work with stock and aftermarket gears. The rear axle uses a 2-14T gear that is used with both stock and aftermarket gears. The 2-16T gears included in the package can only be installed...

FURITEK STARTER 118 2S BRUSHLESS POWER SYSTEM FOR REDCAT ASCENT-18 SUPPORT 2S LIPO only NOTE: Slight modification of the motor mount holes on the stock transmission may be required to get a proper mesh Features: - Plug & play- A smaller and lighter brushless...

1. The link body is made of stainless steel, sturdy and wear-resistant; 2. The plastic ball end adopts curved ball end design; 3. Avoid friction with the drive shaft, providing smoother running power; 4.The high clearance link set eliminates axle wrapping and unnecessary axle...

Quick Overview CEN Racing official Licensed FORD F450 SD KG1 Wheel Edition 1/10 4WD RTR (RED Candy Apple) Custom Truck DL-Series. True 1/10 scale RTR. Body length 26.7 inch (678.18mm) true body scale truck. Item: 8989- KG1 Red Candy AppleItem: 8988 - KG1 Silver Mercury...