DKR-4 FORTIS Upgrade Parts

Specifications:- Charge Plug Type: JST XH-4P Connector- Power Plug Type: XT30 Connector - Voltage: 7.4V- Capacity: 1100 mah

Fits:- CR18P V3 Rushmore, Trail Hunter- CR18P Pro Juice Up- For use with bushings or bearings

Description : - Use for Arktos 6x6 - 1 x Complete Ball Bearing Set (Rubber Seal)

Special Notes:- The included pinion gear is helical design and is required to install on the motor shaft.- The V3 Rushmore and THunter will have a lower ratio with these gears. If you want to maintain the same gear ratio, you will need to...

Description : - Use for Arktos 6x6 - 1 x Aluminum Skid Plate

INJORA 1.3" Cling On Tires for 1/18 1/24 Micro Crawler,70*26mm,T1320Only Compatible with: INJORA 1.3" wheelsFeatures: 70mm tall by 26mm wide Provides Incredible Traction Aggressive pattern and design Made in the Super Soft & Sticky INJORA S5 Compound Long Lasting & Super Consistent Performance Fits...

Specifications:- Hex Size: 7mm- Hex Pin Size: 1.5mm- Weight: TBDWhat's Included:- +10mm Axles x 4- 1.5mm Solid Pins x 4- Brass Hexes x 4 Features:- Brass Hexes for Increasing Weight while Decreasing COG (Center of Gravity)- +10mm Axles     - Increases Track Width for...

INJORA 27g/pcs Brass Wheel Weights Inner Beadlock Rings Fit 1.3" Wheel Rim for 1/24 1/18 RC CrawlerOnly Compatibel with: INJORA 1.3" WheelsFeatures: Made of brass, each weight is 27g Increase the weight of the wheels Improve anti-rollover stability and climbing capability Specifications: Material: Brass...

Description : - Use for Arktos 6x6 - 1 x Machine Aluminum Rear Axle

MEUS Racing 4PCS Silicone Rubber Inserts for 68-72mm 1.3" Tires   Key Features: 1. Fit with 1.3 tires with out diameter of 68-72mm and a width of 22-26mm, e.g, MEUS MS6 Super Bouncin M1301 tires, Mpro Pin M1302 tires. 2. Made of high-quality silicone...

INJORA Obsidian S5 1.3" Rock Crawling Tires for 1/18 1/24 RC Crawler Car (T1323)Note:  Only Compatible with: INJORA 1.3" wheels Features:   INJORA 1.3" 64*24mm Rock Crawling Tires Molded in the Super Soft & Sticky INJORA S5 Compound Deep tread design with a tread...

INJORA 1.3" XHX Pin Tires for 1/18 1/24 Micro Crawler,72*24mm,T1321Only Compatible with: INJORA 1.3" wheelsFeatures: 72mm tall by 24mm wide Provides Incredible Agility Perfectly Spaced XHX-Shaped Pins Dig into Any Surface Made in the Super Soft & Sticky INJORA S5 Compound Long Lasting &...

INJORA 1.3" Aluminium Beadlock Wheels, Negative Offset, for 1/24 1/18 RC Crawler (W1309) Features: CNC aluminium machined Matte Black anodized Negative offset offers wider spacing, enhance stability and overall performance 1.3" wheel will set you ahead of the curve with performance and looks Specifications:...

Description: 1. 100% Brand New. The tires are made of high quality rubber with foam inserts for excellent traction and grip. 2. 4mm Negative Bias: -4MM Negative Bias wheels keep the wheels away from the center of the vehicle to improve stability, and at...

HobbyPlus Machined HD Helical Cut Pinion and Ring Gear 11T/28T

Description: 1. 100% Brand New. The tires are made of high quality rubber with foam inserts for excellent traction and grip. 2. 4mm Negative Bias: -4MM Negative Bias wheels keep the wheels away from the center of the vehicle to improve stability, and at...

INJORA -5.25mm Offset 1.3" Aluminium Beadlock Wheels for 1/24 1/18 RC Crawler (W1313) Features: CNC aluminium machined Black, red, grey, purple anodized Compatible with INJORA 1.3" tires The negative offset design increases track width for greater stability Specifications: Part Number: W1313 Material: Aluminum Offset:...

INJORA 1.3" 70*27mm Swamp Claw Tires & Silicone Rubber Inserts Combo (4) Note:  Only Compatible with: INJORA 1.3" wheels Only recommended for modified RC crawlers, 70mm is too big for most 1/24 and 1/18 bodies! Features: INJORA Swamp Claw 1.3" Tires Unmatched grip, exceptional...

Description : - Use for Arktos 6x6 - 1 x SHD Steel Machine Pinion & Ring gear ( 11T/28T ) Set 

INJORA 1.3" Non-beadlock Wheels for 1/24 1/18 RC Crawlers (Black, White) Features: Made of lightweight and durable plastic Designed to fit 1.3 inch tires If needed, you can glue the tires onto the rims for a secure attachment A great choice for RC enthusiasts...