Xnova brushless high performance outrunner motor designed for extrem 3D 700-800mm helicopter where highest power to weight ratio is important. Recommended for specially 12S. High quality Neodym Magnets. Heat resistant up to 150 degrees C. Specialized wires,heat resistant up to 300 degrees C. Precisely...

The SkyRC SCWS2000 Bluetooth Corner Weight Scale System is the ultimate system for those looking to get their chassis balance dialed - without a rat nest of wires strewn across your bench! Even the slightest difference in weight balance has a significant impact when...

Designed in-house, the RS40 is the only nano servo winch on the market! Built for all 1/24 and 1/18 crawlers like the SCX24, Enduro24, TRX4M, RC4WD Gelande, and more! This nano winch is tiny, but packs plenty of power, speed, and excellent holding capabilities!...

  NSDRC RS100 HIGH TORQUE MICRO SERVO - BLACK * As of April 2nd 2023, the RS100 has been upgraded! With a new motor and gears, it now has even more power, lower amp draw, and now with a magnetic angle sensor for superior...

Specifications: Operating Voltage: 6.0 ~ 8.4 DC Volts Torque: 14Kg.cm@6.0V(194.4oz-in) / 16Kg.cm@7.4V(222.1oz-in) / 18Kg.cm@8.4V(249.9oz-in) Speed: 0.08sec/60°@6.0V / 0.07sec/60°@7.4V / 0.06sec/60°@8.4V Weight: 55.5G Signal: 900-2100Hz Motor Type: 4-Pole Brushless Motor Gear Type: Hardened Steel Operating Temperature: -20℃~65℃ Size: 40.5*20*23.1mm Waterproof: IP65 Suitable for 1:10 on-road...

Specifications: Operating Voltage: 6.0 ~ 8.4 DC Volts Torque: 24Kg.cm@6.0V(333.2oz-in) / 30Kg.cm@7.4V(416.6oz-in) / 32Kg.cm@8.4V(444.3oz-in) Speed: 0.06sec/60°@6.0V / 0.05sec/60°@7.4V / 0.04sec/60°@8.4V Signal: 900-2100Hz Motor Type: 4-Pole Brushless Motor Gear Type: Hardened Steel Operating Temperature: -20℃~65℃ Size: 40.5*20*38mm Waterproof: IP65 Weight: 70g +/-10% Suitable for 1:8...

Specifications: Operating Voltage: 6.0 ~ 8.4 DC Volts Torque: 38Kg.cm@6.0V(527.7oz-in) / 42Kg.cm@7.4V(583.2oz-in) / 46Kg.cm@8.4V(638.8oz-in) Speed: 0.10sec/60°@6.0V / 0.08sec/60°@7.4V / 0.07sec/60°@8.4V Signal: 900-2100Hz Motor Type: 4-Pole Brushless Motor Gear Type: Hardened Steel Operating Temperature: -20℃~65℃ Size: 40*20*40mm Waterproof: IP65 Suitable for 1:7 & 1:8 scale...

Specification Versions CC2500 4in1 ELRS  ELRS Starter Set CC2500 + TBS Nano Crossfire Combo Physical Dimensions 170*159*108mm Weight 350 grams Operating Frequency 2.400GHz-2.480GHz Internal RF Options CC2500 multi-protocol 4-in-1 multi-protocol ELRS CC2500 multi-protocol Supported Protocols Module dependent Module dependent ELRS Module dependent RF Power...

    FURITEK STINGER BRUSHLESS POWER SYSTEM FOR AX24With the incredible successful release of Stinger brushless systems for SCX24, FCX24, Traxxas TRX-4M and Axial UTB18, Furitek team has expanded the Stinger family for newest Axial AX24 crawler kit.The new Furitek STINGER brushless power system...

Special Edition Purple RS100M Micro Servo & Horn  1 x Purple RS100 Servo 1 x Purple Aluminum Horn with M1.4 threads  * As of April 2nd 2023, the RS100 has been upgraded! With a new motor and gears, it now has more power!  Operating...

  Special Edition Red RS100M Micro Servo & Horn  1 x Red RS100 Servo 1 x Red Aluminum Horn with M1.4 threads  * As of April 2nd 2023, the RS100 has been upgraded! With a new motor and gears, it now has more power! ...

INJORA 180 Brushed 55T Motor with Stainless Steel Pinion for 1/18 RC Crawler TRX4M Upgrade (INM11)Note: While providing more torque, this motor will also increase the speed Not waterproof Suit For: 1/18 Traxxas TRX4MFeatures: High Torque magnet and rotor Stronger drag brake and torque...

INJORA 180 PRO Brushed 48T Motor with Stainless Steel Pinion for 1/18 RC Crawler TRX4M Upgrade (INM11)Note: While providing more torque, this motor will also increase the speed Not waterproof Suit For: 1/18 Traxxas TRX4MFeatures: Extremely high-strength neodymium magnets Stronger drag brake and torque...

INJORA 030 050 Brushed Motor 66T 88T for 1:24 RC Crawler Axial SCX24 AXI90081 AXI00002 AXI00001 AXI00004 Upgrade PartsNotes: 050 motors require a different mounting plate with 2 extra holes. 050 motors are longer than stock motor, so one of the battery tray posts needs to...

INJORA 030 050 Brushed Motor 66T 88T for 1:24 RC Crawler Axial SCX24 AXI90081 AXI00002 AXI00001 AXI00004 Upgrade PartsNotes: 050 motors require a different mounting plate with 2 extra holes. 050 motors are longer than stock motor, so one of the battery tray posts needs to...

INJORA 030 050 Brushed Motor 66T 88T for 1:24 RC Crawler Axial SCX24 AXI90081 AXI00002 AXI00001 AXI00004 Upgrade PartsNotes: 050 motors require a different mounting plate with 2 extra holes. 050 motors are longer than stock motor, so one of the battery tray posts needs to...

Product Model: FS-R4P PWM Channel: 4 Wireless Frequency: 2.4GHz Wireless Protocol: ANT Range: 100~300m (Ground) Antenna Type: Built-in single antenna Power: 3.5-8.4V RSSI: Not Supported Data port: PWM Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online Update: No Dimensions:...

Product Model: FS-R4B PWM Channels: 4 RF: 2.4GHz Protocol: ANT Range: 100~300M(Ground) Antenna: Single Antenna Input Power: 3.5-8.4V RSSI: Support Data Output: PWM Temperature Range: -10℃—+60℃ Humidity Limit: 20%-95% Online Update: Yes Dimensions: 30.2*18.0*13.0mm Weight: 5g Certification: CE，FCC

Product Model: FS-R7P PWM Channels: 7 RF: 2.4GHz Protocol: ANT Range: >300M(Ground) Antenna: Single Antenna Input Power: 3.5-8.4V RSSI: Support Data Output: PWM Temperature Range: -10℃—+60℃ Humidity Limit: 20%-95% Waterproof Level:PPX4 Online Update: Yes Dimensions: 35*23.3*13.3mm Weight: 8g Certification: CE，FCC ID:2A2UNR7P00