Replacment Motor for Boomerang Ranger Retract Unit.   1 Motor

Replacement Motor with Slider for Boomerang Turbinator 2 Retract Unit.   1 Motor with Slider  

 FITS ELAN V2, SPRINT V2 AND RANGER JETS!  This tank called the Elan+Smoke It is designed by Paul Jacques to fit into the BOOMERANG ELAN with no modifications. The tank carries a capacity of 125 oz. divided into 35 oz. of Smoke oil and...

Replace canopy for Elan V2 White Colorcategory-jets,category-jets-brand-boomerang-rc-jets,category-jets-brand-boomerang-rc-jets-model-elan-v2,category-jets-brand-boomerang-rc-jets-model-elan-v2-model-elan-v2

KingTech G4 utilizes SBus data transmission. Engine/ECU integration, all operating parameters including total run time are all recorded into the engine. The smaller and lighter external Data Relay Module (DRM) is responsible for all data, signal and power transmission. A micro USB connector is...

Includes: Lizard Canopy Clamp x 1 Set Use for: M138 Lizard category-jets,category-jets-brand-sab-avio,category-jets-brand-sab-avio-model-lizard,category-jets-brand-sab-avio-model-lizard-model-lizard

Includes: 1 x Tank Smoke 1 x Fuel Clunk 1 x Tank Alu part -1 1 x Tank Alu part -2 1 x Tank Bunge 5 x Zip Tie 2.5 x 200mm 2 x Brass Tube 3 x 4 x 90mm 1 x Yellow...

The ST60 Female Housing Surface Mount is expertly designed to securely mount AMASS XT60 connectors. The connector is inserted into the housing and captured by our unique locking system. The mount can be screwed or glued into place. Screws are not included. This fits genuine...

Mount for Female (Male pins) XT 60 Connectors. 90 Degree side mount. Fits genuine AMASS XT60 connectors.  Connector not included.

Festo Ball Valve Mount for holding Festo 6mm valves firmly in place on RC Gas Turbine Jets. The mount can be glued and screwed into place. Valve is secured to the mount with two zip ties that are provided. Ball Valve Not Included

E170 Turbine Compact and powerful 170N turbojet engine with 125,000 RPM max speed, 1500g weight, mobile app tuning, and multi-protocol telemetry support—designed for high-performance RC jets.  Specification: Diameter: 109 mm Length: 245 mm Weight: 1500 g RPM: 33,000 – 125,000 Idle Thrust: 6 N Max Thrust: 170 N EGT:...

SizeMini Nominal width2.6 mm Tubing insertion depth11.5 mm Mounting positionAny DesignStraight design Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi...

SizeMini Nominal width3.7 mm Tubing insertion depth12 mm Mounting positionAny DesignStraight design Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar Operating pressure for entire temperature range-13.775 psi...

K-240G5 SPECIFICATIONS Diameter: 119mm / 4.68" Length: 278mm / 10.94" Weight: 2000g / 4.40lb Maximum RPM: 109,000 Max Thrust: 24kg / 52.9lb EGT: 750°C max Pump type: Digital sbus brushless pump KP800DP Battery:11.1v Lipo ( At least 2200mah 35C ) Start time: 10~15 seconds...

110oz Composite fuel tank for the Turbinator 2 Jet.  Comes with fittings and fuel line. Dimensions are:  10.25" x 4.5" x 4.5"    

Replacment Motor for the Sprint V2 and Elan Retract Unit.   1 Motor  

Protect your Ranger wings and stabs with PennBags!  Double protection with a heavy duty quilted outside, with soft flannel on the inside! PENNBAGS ARE MADE IN THE USA!   5 piece set comes with: 2 Wing Bags 2 Horizontal Stab Bags 1 Vertical Stab Bag

This is the Boomerang Jets Turbinator II Fuel and Smoke Partition Tank carrying 75 oz fuel and 35 oz of smoke.  The total tank capacity is 110 ounces (3.2 L) . Tank measures 10" (254 mm) Long x 4.375" (111.12 mm) High x 4.5" (114 mm) Wide. This...

  Special Order: Processing time is about 3 - 10 business days   K-235G4 DESCRIPTION KingTech G4 utilizes SBus data transmission.• Engine/ECU integration, all operating parameters including total run time are all recorded into the engine.• The smaller and lighter external Data Relay Module (DRM) is...

KingTech G4 utilizes SBus data transmission. Engine/ECU integration, all operating parameters including total run time are all recorded into the engine. The smaller and lighter external Data Relay Module (DRM) is responsible for all data, signal and power transmission. A micro USB connector is...