INJORA Aluminum 26mm Oil Shocks for 1/30 Axial SCX30 Note:   Shock oil is not included. Shocks can be used with or without shock oil. Due to the compact size, adding oil may require a filling tool. Features: Two spring rates included (Soft, Hard)...

INJORA 0.7" D18 Aluminum 5-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7002) Note: Designed and tested for use with INJORA 0.7" tires! Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and...

INJORA Aluminum Transmission Kit for 1/30 Axial SCX30 (Assembly Required) Notes: Assembly is required. Apply appropriate grease to the gears during assembly. Skid plate is not included, allowing builders to choose aluminum or brass options based on build preference. Features: CNC-machined aluminum gearbox housing...

INJORA Axle Worm Gear Set for 1/30 Axial SCX30 (2/13T, 2/16T) 2/13T Overdrive Ratio: Increases speed by approx 23%2/16T Ratio: Same as stock, does not change the speed Features: Made from stainless steel for excellent durability and corrosion resistance Available in 2/13T and 2/16T...

INJORA 36*14mm 0.7" Swamp Claw Tires for 1/30 Axial SCX30 (T7019) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Features: Molded in the Super Soft & Sticky INJORA...

INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 Axial SCX30 Note: Compatible with both INJORA and stock SCX30 servos, gears, steering knuckles, chassis links. Not compatible with original SCX30 size steering links and dogbone shafts as the axle housings are 3mm extended...

INJORA Aluminum N30 NANO Servo with Servo Saver for 1/30 Axial SCX30 Features: CNC-machined aluminum servo case for added strength and durability Metal gear set built to handle higher steering loads Higher torque output than the stock servo for stronger steering performance Spring-loaded servo...

INJORA Custom M2 3.0 Stainless Steel Wheel Nuts for 1/30 Axial SCX30 Features: Custom-designed M2 wheel nuts specifically for Axial SCX30 Smaller than standard M2 wheel nuts More compact outer diameter for improved scale realism Precision CNC-machined from stainless steel for consistent fit Corrosion-resistant...

INJORA 40*14mm 0.7" XHX Pin Tires for 1/30 Axial SCX30 (T7021) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Features: Molded in the Super Soft & Sticky INJORA...

INJORA Black Coating Brass Steering Knuckles for 1/30 Axial SCX30 Features: CNC-machined brass for precise fit, strength, and corrosion resistance Adds weight to the front axle for improved climbing stability and overall vehicle control Simple, direct-replacement installation with no modifications required Black-coated brass finish...

INJORA Brass Skid Plate for 1/30 Axial SCX30 Features: CNC-machined brass for precise fit and reliable strength Simple, direct-replacement installation with no modifications required Adds low-mounted brass weight to lower the center of gravity for improved climbing stability Specifications: Part Number: SCX30-06BR Material: Brass...

INJORA 0.7" D18 Aluminum 6-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7001) Note: Designed and tested for use with INJORA 0.7" tires! Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and...

INJORA Aluminum Front & Rear Axle Housing Set for 1/30 Axial SCX30 Features: CNC-machined aluminum alloy for precise fit and long-term durability Black anodized finish resists corrosion and provides a clean, scale appearance Direct replacement for stock plastic axle housings with no modifications required...

INJORA Stainless Steel CVD Axle Shafts for 1/30 Axial SCX30 Features: Stainless steel construction for improved wear resistance and durability Upgraded front axle CVD design to replace the stock dogbone-style axle shafts Extended axle shaft threads by 1 mm allow the installation of wider...

INJORA Aluminum 23mm Oil Shocks for 1/30 Axial SCX30 Note:   Shock oil is not included. Shocks can be used with or without shock oil. Due to the compact size, adding oil may require a filling tool. Features: Two spring rates included (Soft, Hard)...

INJORA MBL32 G2 Waterproof Micro Brushless ESC for 1/24 1/18 RC Crawlers TRX4M Ascent18 SCX24 Programming Tutorial  Compatible with:  INJORA 1721 Purple Viper motors INJORA 2204 Fat Viper motors Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro...

INJORA Brass Inner Clamp Rings for INJORA 0.7" D18 Wheels Note: Only compatible with INJORA 0.7" D18 wheels such as: W7001 W7002 Features: CNC-machined brass inner clamp rings Each ring weighs 4.7g, adding weight to the wheels for improved stability Helps lower the center of...

INJORA MBL32-NANO Brushless ESC for 1/30 Axial SCX30 Note: Pre-configured and ready to run. No programming required. USB programmer card is not included. For use with INJORA brushless motors only. Damage caused by using other motors is not covered under INJORA warranty. Please use...

For Axial SCX24, INJORA 0.05" 1.27mm Hex Screwdriver Tool Suit for 1/24 1/18 RC Crawler Cars: 1/24 RC Crawler Axial SCX24 AX24 1/30 RC Crawler Axial SCX30 Almost all of the INJORA 1.0" wheels Features: Made of high quality alloy steel Non-slip aluminium handle Resistant to...

INJORA D19 0.7" Aluminum Beadlock Wheels for 1/30 Axial SCX30 (W7008) Note: Designed and tested for use with INJORA tires. Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined aluminum for high precision and durability...