HobbyWing Platinum 25A V4 ESC

HobbyWing
|
Platinum-25A-6S-V4
You will earn 29.99 points for buying this product
Price Match Guarantee
$29.99 $0.00( / )
Perfect for Oxy heli 2 upgrade 3-6S LiPo Built-in BEC 5V-8V (default 5V) Firmware upgrade and programming via WiFi Express module or LCD program box  (purchase separately) Model Platinum 25A ESC V4 Input Voltage  3-6S LiPo Cont./Peak Current (10s) 25A/40A Application > 450 heli or a small fixed wings aircraft (Switch-mode) BEC Switch Mode:6V/7.4V,3A...

Perfect for Oxy heli 2 upgrade

  • 3-6S LiPo
  • Built-in BEC 5V-8V (default 5V)
  • Firmware upgrade and programming via WiFi Express module or LCD program box  (purchase separately)
ModelPlatinum 25A ESC V4
Input Voltage 3-6S LiPo
Cont./Peak Current (10s)25A/40A
Application> 450 heli or a small fixed wings aircraft
(Switch-mode) BECSwitch Mode:6V/7.4V,3A
Separate Programming PortFor connecting LCD Program Box/WIFI Express
Throttle Signal/BEC Output/RPM Signal Transmission Wire(s)White Throttle Signal Wire/Red & Black BEC Output Wires/ Yellow RPM Signal Transmission Wire
Input WiresRed-16AWG-100mm*1/Black-16AWG-100mm*1
output wiresBlack-18AWG-75mm*3
Output connectors3.5mm Gold Connectors (Female)
Weight/Size27g / 47x22x10mm

 

Download
 Users_manual_Platinum25A.pdf
 HOBBYWING Governor function explained (PDF)
Type: 

Heli ESCs

Vendor: 

HobbyWing

SKU: 

Platinum-25A-6S-V4

Weight: 

0.25 lb


Product Spare Parts

Customer Reviews

Based on 6 reviews
67%
(4)
17%
(1)
17%
(1)
0%
(0)
0%
(0)
h
h.n.

This is a good light speed controller to install, but i don’t know if it can connect for both dual rate motor.

M
M.H.
Nice ESC but beware of BEC brownout

I love the hobbywing ecs. I have this 25amp esc on a blade 300x modified to spin 270 mm blades with high voltage servos and tail. I am using beastx FBL. Doing pitch pumps caused me to lose control of the servos. The BEC is only rated at 3 amps.

B
Bob S.
25a Hobbywing esc

Seems good quality installed in Oxy2 but removed because on ANOTHER bad program box I think heli direct will take care of ten issues usually always have

B
Brad A.
Love the GOV mode in this ESC

I have one of these installed in a very light 300 sized helicopter (spins 315mm main blades). Works well for the sport type flying that I do with this helicopter. Would probably opt for something with a higher rating if I were able to fly hard 3D, but who I am I joking...... I cannot fly that hard if I wanted to! This ESC is light, small, inexpensive, and easy to set up. A winner in this application!

T
Todd B.
Hobbywing Platinum 25A V4

Easy setup and perfect size for my Oxy 2

D
Dean C.

Easy to set up.

Customer Reviews

Based on 6 reviews
67%
(4)
17%
(1)
17%
(1)
0%
(0)
0%
(0)
h
h.n.

This is a good light speed controller to install, but i don’t know if it can connect for both dual rate motor.

M
M.H.
Nice ESC but beware of BEC brownout

I love the hobbywing ecs. I have this 25amp esc on a blade 300x modified to spin 270 mm blades with high voltage servos and tail. I am using beastx FBL. Doing pitch pumps caused me to lose control of the servos. The BEC is only rated at 3 amps.

B
Bob S.
25a Hobbywing esc

Seems good quality installed in Oxy2 but removed because on ANOTHER bad program box I think heli direct will take care of ten issues usually always have

B
Brad A.
Love the GOV mode in this ESC

I have one of these installed in a very light 300 sized helicopter (spins 315mm main blades). Works well for the sport type flying that I do with this helicopter. Would probably opt for something with a higher rating if I were able to fly hard 3D, but who I am I joking...... I cannot fly that hard if I wanted to! This ESC is light, small, inexpensive, and easy to set up. A winner in this application!

T
Todd B.
Hobbywing Platinum 25A V4

Easy setup and perfect size for my Oxy 2

D
Dean C.

Easy to set up.