8965 Hyper Lube 1/10 Scale 4WD RTR Monster Truck MT-Series
This is the CEN Racing Hyper Lube 1/10 Scale 4WD RTR Monster Truck.
ESC-40A WP-1040-Brushed (Powered by HobbyWing):
- Water-proof and dust-proof for all weather
- Built-In Capacitor Module
- Automatic throttle range calibration
- Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
- Over-Heat protection and throttle signal loss protection
- Easily programmed with jumpers
Motor -RS-550 High Torque Motor -Powered By Mabuchi Motor
Servo -12Kg Servo O.E.M. by Savox:
- 4.8V 0.26 sec/60deg 10.0 kg-cm
- 6.0V 0.23 sec/60deg 12.0 kg-cm
- 25T Horn Gear Spline
Radio System:
- Pistol-Grip Mod-3S 3 Channel Transmitter
- Digital Trimming
- Steering Dual-Rate (ST D/R) Adjustment
- End Point Adjustment (EPA)
- Built in Failsafe
Power Alarm Chassis:
- DVP (Dual Vertical Plate) Chassis Design.
- Sealed Receiver Compartment.
- Easy Access/Quick Release Battery Tray.
- Battery Tray Size 146x50x25mm.
- Adjustable Wheelie Bar Ready (w/Ball Bearing).
- Full Precision Ball Bearing Support.
- Adjustable Turnbuckles -Harden Steel Steering Drag Link.
- Fully Equipped with Allen Hex Screws.
- Adjustable Body Post .
- High Torque Servo Saver. - Optional 4-Wheel Steering Design.
Suspension:
- 8 Big Bore Oil Filled Coil Over Shocks.
- Aluminum Anodized Shock Caps.
- 10mm over size shock body.
- 3mm hardened steel polished shaft.
- Stiff Hard Racing Spring.
- Fixed Wheelbase.
- Ride Height- Adjustable with pre-load.
- Realistic 4-Link Suspension design.
Drivetrain:
- Sway bar & wheelie bar included.
- 4 Wheel Drive.
- Center Shaft Drive Train for more power transferred to the wheels.
- Highly Efficient Transmission System.
- Wide Range Easy Changeable Gear Box Design.
- Sealed transmission eliminates dirt and dust.
- Sealed Axle housing.
- 5mm Hardened Steel Axle shaft.
- Differential Center Locker Front/Rear Planetary Gear Type.
- Ring & Pinion 30/15T.
Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Wheel: Deep Dish 2.2-inch (55mm) Monster Truck Wheel Tires: Monster Truck V-Pattern Tire 55x136x74mm
Needed To Complete:
- 2S or 3S LiPo Battery or 6-Cell NiMH Battery w/T-Style Connector
- Compatible Battery Charger
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
CEG8965 |
| Weight: |
30.0 lb |
Product Spare Parts
Customer Reviews
This reminds me of my good old days of going to Monster Jam and seeing those huge monster trucks crushing cars and doing jumps! It's a ton of fun with great jumping and stomping skills! I want a few more to collect and compete with each other. It's not too big nor too small. Just a perfect size and loves to do wheelies! Very durable so far. The steering horn needs a bit of a trim to not catch up on the side of the vertical rails. But it's no big deal. The shocks are a bit bouncy but that's kinda fun as well. Overall, it seems like a great truck so far. Love it!
Cool 2.2 MT, I like the scale 275mm wheelbase with narrow axles. I started modifying right out of the box, brushless on 3s, body, lighter wheels and tires. Wish it had an aluminum motor mount.
These guys are awesome
I would buy other one of cen racing monster truck again it just like a real from chassis to wheel
At speed this truck is a monster truck! It wheelies, it bounces, it even bicycles but needs more punch to donut! It is a nice monster truck ...however it has issues with steering that cause a vague feeling or inoperable action at slow speed. As in let off the accelerator to turn. This is fixable! Servo on axle ordered after two runs. LiPo battery upgrade next as well as a wider footprint.
Customer Reviews
This reminds me of my good old days of going to Monster Jam and seeing those huge monster trucks crushing cars and doing jumps! It's a ton of fun with great jumping and stomping skills! I want a few more to collect and compete with each other. It's not too big nor too small. Just a perfect size and loves to do wheelies! Very durable so far. The steering horn needs a bit of a trim to not catch up on the side of the vertical rails. But it's no big deal. The shocks are a bit bouncy but that's kinda fun as well. Overall, it seems like a great truck so far. Love it!
Cool 2.2 MT, I like the scale 275mm wheelbase with narrow axles. I started modifying right out of the box, brushless on 3s, body, lighter wheels and tires. Wish it had an aluminum motor mount.
These guys are awesome
I would buy other one of cen racing monster truck again it just like a real from chassis to wheel
At speed this truck is a monster truck! It wheelies, it bounces, it even bicycles but needs more punch to donut! It is a nice monster truck ...however it has issues with steering that cause a vague feeling or inoperable action at slow speed. As in let off the accelerator to turn. This is fixable! Servo on axle ordered after two runs. LiPo battery upgrade next as well as a wider footprint.