Align T-Rex 470L Tail Pitch Assembly
Includes:
Metal Bearing mount x1
Bearing MR74ZZ x 2(u03a64xu03a67x2.5mm)
Bearing mount washer x 1(u03a64xu03a65.1x1.6mm)
Slide shaft x 1(u03a62xu03a63x8.4mm)
Metal T type arm x 1
Control link x 2(u03a61.5xu03a62.3x1.4mm)
Collar B x 4(u03a62xu03a63x2.5mm)
Socket Collar screw x 4(M2x6mm)
Use for:
T-REX 470L
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
H47T016XXT |
| Weight: |
0.13 lb |
Product Spare Parts
Electronics
Works same as stock to replace a broken or worn out slider.
After a work bench tail strike as a precaution I wanted to replace tail blade holder. Part was a direct fit with no concerns
I have an original Alingn 450 Pro with flybar. I had to replace the tail rotor blade grip and hub assembly. The only replacement I could find was from the 470l series. I didn’t have the right tail pith assembly linkages, so I had to make it work with 1/4” nuts to use as locknuts and to keep it actuating freely. After searching on many other sites with no success, I finally found what I needed on Heli-Direct. I received it in a good timeframe and now I have the proper mechanism. I felt I had to always check the tightness and how I had it together was not right but it stayed solid. Now I am confident that it will stay together because I have the right part, and only Heli-Direct had it. Thank you
Same as original
Works same as stock to replace a broken or worn out slider.
After a work bench tail strike as a precaution I wanted to replace tail blade holder. Part was a direct fit with no concerns
I have an original Alingn 450 Pro with flybar. I had to replace the tail rotor blade grip and hub assembly. The only replacement I could find was from the 470l series. I didn’t have the right tail pith assembly linkages, so I had to make it work with 1/4” nuts to use as locknuts and to keep it actuating freely. After searching on many other sites with no success, I finally found what I needed on Heli-Direct. I received it in a good timeframe and now I have the proper mechanism. I felt I had to always check the tightness and how I had it together was not right but it stayed solid. Now I am confident that it will stay together because I have the right part, and only Heli-Direct had it. Thank you
Same as original