- Home
- Helicopter Parts
- ALUMINUM SWASH LEVELER V2...


ALUMINUM SWASH LEVELER V2 for Kraken 580 Nitro/RAW 580/Piuma 700 - H1385-S
Help you set up the perfect level swashplate
H1296-S>First batch SG580 (manual rev.1.0)
H1385-S>Second batch SG580 (manual rev 1.1 and up) & SG581
Includes:
- 1 x Swashplate Leveler.
- 1 x Magnet 86x10
Used for:
- Goblin Kraken 580 2nd batch & SG581
- Goblin RAW 580/Piuma 700
Type: | |
---|---|
Vendor: | |
SKU: |
H1385-S |
Weight: |
0.13 lb |
Product Spare Parts
Electronics
I'm glad this works in three different helicopters works for the 700 puma too now I'll probably have to get one also
Excellent quality
Excellent quality item!
Must have for your SAB build, Magnetic and very well made !!
Great product and super fast shipping!
I had to buy this elsewhere as Helidirect was out of stock. This tool works perfectly on the 2nd batch of electric 580s. In addition to making sure your swash is 100% level, it is also machined so when installed the blades should be at zero degree pitch. This helped me out tremendously as I was able to adjust both blades to be zeroed after assembly of the helicopter. before adjustment one blade was 1.3* and the other was 1.5* which would have caused a tracking issue. Not to mention this tool can be used without taking off a single part from the head, it just slips onto the shaft right below the swash, locks into the top of the gear box and is also held in place with a magnet.
Used in my kraken 580 and it was leveled perfectly. Great quality
Makes setting up a level swash easy. Plus, it stays in place with a magnet.
I'm glad this works in three different helicopters works for the 700 puma too now I'll probably have to get one also
Excellent quality
Excellent quality item!
Must have for your SAB build, Magnetic and very well made !!
Great product and super fast shipping!
I had to buy this elsewhere as Helidirect was out of stock. This tool works perfectly on the 2nd batch of electric 580s. In addition to making sure your swash is 100% level, it is also machined so when installed the blades should be at zero degree pitch. This helped me out tremendously as I was able to adjust both blades to be zeroed after assembly of the helicopter. before adjustment one blade was 1.3* and the other was 1.5* which would have caused a tracking issue. Not to mention this tool can be used without taking off a single part from the head, it just slips onto the shaft right below the swash, locks into the top of the gear box and is also held in place with a magnet.
Used in my kraken 580 and it was leveled perfectly. Great quality
Makes setting up a level swash easy. Plus, it stays in place with a magnet.