Azure Power 385mm Heli Main Blades
Azure Power Carbon Rotorblade 385mm
AZ385 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.
In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.
The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.
The AZ385 will unleash the full potential of your helicopter.
Specifications
| Length: | 385mm |
| Blade Grip: | >5mm |
| Hole: | 3mm |
| Weight approx.: | --- |
| Width: | 35,3-41,2mm |
| Airfoil: | Symmetric |
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
AZ-101385 |
| Weight: |
0.44 lb |
Product Spare Parts
Customer Reviews
Lots of bite compared to any align blades, better than rotortech. Tiny bit floaty. Low rpm to high rpm is soild throughout! Run these on all my big machines! Wide cord at the end of the blades, plus they have a killer sound when I load them up!
I have tried most main blades and think that these are the best
These blade make a great flying helicopter fly just a bit nicer. Flight time is about the same but they are quieter and smoother overall.
Wish these blades were more popular. I've noticed longer flight times on the goblin 380 due to lighter disc loading
Great looking blades! They also are a bit wider than my Rotortechs and seem to bark a little louder. Durable as well - had a rough experimentation phase where my governor would try going from 0-100% immediately when TH was released and would smack the blade against the grip. Some light cosmetic damaged was caused but the blades are strong and unphased!
Tried them on my 700 and liked them so much I got these for my 380....
Works good. Strong bite when doing pitch pumps. Little getting used to as they react differently from standard blades , definitely recommend them. Using on my protos 380
parts work fine thank you
Customer Reviews
Lots of bite compared to any align blades, better than rotortech. Tiny bit floaty. Low rpm to high rpm is soild throughout! Run these on all my big machines! Wide cord at the end of the blades, plus they have a killer sound when I load them up!
I have tried most main blades and think that these are the best
These blade make a great flying helicopter fly just a bit nicer. Flight time is about the same but they are quieter and smoother overall.
Wish these blades were more popular. I've noticed longer flight times on the goblin 380 due to lighter disc loading
Great looking blades! They also are a bit wider than my Rotortechs and seem to bark a little louder. Durable as well - had a rough experimentation phase where my governor would try going from 0-100% immediately when TH was released and would smack the blade against the grip. Some light cosmetic damaged was caused but the blades are strong and unphased!
Tried them on my 700 and liked them so much I got these for my 380....
Works good. Strong bite when doing pitch pumps. Little getting used to as they react differently from standard blades , definitely recommend them. Using on my protos 380
parts work fine thank you