Join Our newsletter
Subcribe to get information about products and coupons
Earn [points_amount] when you buy this item.
Couldn't load pickup availability
Description:
This receiver unit is Sanwa high speed FHSS-4 and FHSS-3 compatible
Features:
Compatible Transmitters:
Sanwa M17
Sanwa M12S
Sanwa M12
Sanwa MT44
Sanwa MT4S
Sanwa MT4
Sanwa M11X
Package Included:
1 x Receiver
2 x 1.5mm 3P JST plug with cable
Weight | 30 g |
---|---|
Dimensions | 16 × 14 × 1 cm |
Binding procedure:
Step1. Select FH-4 or FH-3 protocol on transmitter and switch to bind page.
Step2. Press setup(bind) button then power on the receiver, after powered on release setup(bind) button. The receiver should enter the binding mode for 10 seconds(the led will slowly flash for 10 seconds).
Step3. Operate ‘bind’ operation on transmitter while the receiver led is slowly flashing.
Step4. If you did not make the ‘bind’ operation on transmitter in 10 seconds(receiver led slowly flashing), go back to Setp2 and do it again.
Step5. After binding please power off the receiver and transmitter then power them on to confirm they are bond.
Vendor: | DASMIKRO |
SKU: | DSK-301 |
Barcode: | |
Availability: | Out Of Stock |
Product Type: | Receiver |
Weight: | 0.11 lb |
Thanks for subscribing!
This email has been registered!