Join Our newsletter
Subcribe to get information about products and coupons.




Couldn't load pickup availability
The Worldās First 2-in-1 Outrunner Brushless Motor with Integrated ESC for 1/10 RC Crawlers
Furitek proudly introduces theĀ KOMODO UNITY 10 CompetitionĀ ā theĀ first-everĀ system in the world to integrate aĀ high-performance FOC ESC directly into an outrunner brushless motor, specifically engineered forĀ 1/10 scale RC crawlers.
This revolutionaryĀ 2-in-1 designĀ deliversĀ exceptional torque,Ā ultra-smooth throttle control, and sets a new benchmark forĀ lightweight, compact performance. Itās theĀ cleanest, lightest, and most space-efficient power systemĀ ever created for 1/10 crawler rigs.
Whether youāre navigating comp gates or scaling technical rock lines, the UNITY 10 Competition offers a seamless combination ofĀ brute torque,Ā precise control, andĀ clean installation. With the ESC integrated into the rear of the motor, it eliminates wiring mess, reduces overall weight, and frees up space in your chassis ā all without sacrificing performance.
š¬Ā Real-World Tested by Top 10 Driver Danny Slinger:
āPowerful enough to pull the whole car up on edges⦠even in high grip situations, the system never lost control.ā
āThrottle punch is now how it feels on Rhino ESCs with Holmes 380 or Stubby ā even better.ā
āSuper fast reaction, smooth transitions ā nothing too crazy, just the sweet spot.ā
A fully unified package that eliminates clutter and optimizes layout and weight distribution.
Silky smooth startup and crawl precision with intelligent current regulation to minimize cogging and heat.
No external ESC. No wiring mess. Just performance-focused minimalism.
Live tuning and firmware updates via Bluetooth ā no extra programmer or PC required.
SelectableĀ 5.5V / 7.4V / 8.4VĀ output ā powerful enough to handleĀ high-torque servos, andĀ heavy-duty electronicsĀ in the most demanding crawler setups.
One of theĀ lightest integrated 2-in-1 systemsĀ available for 1/10 RC crawlers ā keeping your rig agile without sacrificing power.
Power Output: Up to 280W, 50A continuous / 100A burst
Fits most 1/10 comp rigs and shafty setups with ease
1xĀ FURITEK KOMODO UNITY 10 Competition 2300kvĀ (2-in-1 Motor + ESC) withĀ XT60 connector
1xĀ User Manual
š„Ā Unity 10 Competition ā Built for champions. Proven by champions.
Join the next generation of crawling performance.

Ā
Ā
Ā
| Vendor: | Furitek |
| SKU: | FUR-2713 |
| Barcode: | 8936037011882 |
| Availability: | In Stock |
| Product Type: | Car Electronics |
| Weight: | 0.1 lb |
Was excited about this 2-in-1, lower weight smaller profile than all others and its an outrunner. Got everything installed and hooked up. Verified everything was wired correctly before throwing a 3s battery on it. As soon as I hooked the battery up, it went up in smoke and burnt all the wires running to the receiver. Idk if it was wired wrong internally from factory or what but it burnt up FAST. I'd advise to buy different setup until they figure out what there issue is.
Very disappointing. Installed and tested out briefly on my couch. Motor became very hot (about 200°) less than a minute in. Started smoking and the esc kept restarting. Not worth buying.
Still testing it out. It definitely runs hot when you run full drag brakes. Decently smooth once you sort out the settings in the tuner.
I bought this because I've used their mini products and they work great. This is no exception, love the Bluetooth app.
The new Unity 10 is EPIC!!! I now have 3! Direct RC
Ships fast and it shows up within a few days. Impressed all the way around!
I ordered three of these motors through Amazon. I have installed 2 of the three, and upon testing in my hobby room, one is immediately dead. The motor is jumping, and it can't even turn the transmission. I believe the ESC has died. There is also evidence that it was at least hot enough in less than 30 seconds of running that it has slung solder from within. The second motor that I installed will get a test run tomorrow, as it seems to be working alright. Though, if it performs anything like the first one, I will be returning all three. I have 2 Furitek komodo setups in my scx24's and love them.. which is why I decided to give their 10th scale set up a try. I've been building and playing hard with crawlers for the past 5 years, and my faith in this setup is not looking too good.
I like the compactness.
I don't like that it overheated on the first time out. I've made some changes mechanically and in the settings to see if that fixes the issue.
So I've only installed and tested in my home but I really like it so far and the fact that you can adjust on the fly from your phone is a big advancement for the RC community in crawling, will do actual test this weekend to see how well it does.
Thanks for subscribing!
This email has been registered!