FURITEK STARTER 2S BRUSHLESS POWER SYSTEM FOR REDCAT ASCENT-18
FURITEK STARTER 118 2S BRUSHLESS POWER SYSTEM FOR REDCAT ASCENT-18
SUPPORT 2S LIPO only
NOTE: Slight modification of the motor mount holes on the stock transmission may be required to get a proper mesh
Features:
- Plug & play
- A smaller and lighter brushless motor VENOM for low C.G. setup same like stock
- High performance and powerful 30A/50A brushless ESC with FOC technology
- Wifi module for wireless connection
- Precision CNC steel pinion for long-lasting operation
- Powerful at low speed but also more powerful and fast at high speed
- High torque at low speed crawling
- Super smooth without any cogging at both low and high speed operation¬
- Compatible with stock battery
- Lifetime FREE firmware upgrade!
Package includes:
- 1 x LIZARD PRO 30A/50A BRUSHED/BRUSHLESS ESC FOR REDCAT ASCENT-18 WITH FOC TECHNOLOGY with enclosing plastic case
- 1 x built-in wifi module
- 1 x VENOM 1212 3450KV brushless motor
- 1 x 11T CNC Steel Pinion
Motor Features and Specs
Features:
- 12 Pole hi-torque motor design.
- Super thin (0.2 mm) stator laminations---lower eddy losses---maximizes efficiency.
- Japansese NMB --High RPM ABEC5 bearings.
- Precision balanced rotor, smoothness for best reliability and maximum RPM.
- CNC machined 6061 T6 billet aluminum heatsink can.
- Precision engineered for maximum energy conversion.
- High purity and higher temperature single copper windings, lower copper losses,
very good heat dissipating, maximizes efficiency.
Specifications:
- KV (RPM/Motor) – 3450
- No-load current @10V – 0.7A
- Watt – 120W
- Battery – 2S
- Resistance – 0.16 Ohms
- Max Current – 10A
- Slot/Pole – 12
- Motor size (mm) – 15.5x20.6
- Shaft (mm) – 1.5x6
- Weight (g) – 17.5
ESC Features and Specs
Features:
- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)
- FOC (Field-oriented control) technology
- Plug & Play designed for REDCAT ASCENT-18 crawlers
- 5V/ 6.5V 2.5A Built-in BEC (config via app)
- Support 2S-3S lipo battery - Mini size and lightweight
- Super easy programming via App on both Android and IOS
- Firmware update available (Bluetooth module required)
- Real-time telemetry up to 10Hz
Specifications:
- Support 2S-3S lipo battery (ESC support 3S only, motor only support 2S)
- BIG BEC: 5V or 6.5V 2.5A (No additional BECs necessary when using big Servos)
- Constant current: 30A
- Burst current: 50A
- Built-in power switch
- Built-in wifi module
- Dimension (mm): 28(L)x 15.5(W)
- Weight: 3.7 gram
Extra requirement:
- Require external RX/TX. If you want to run with Stock TX. Let use SKU: FUR-2525 or FUR-2530
Type: | |
---|---|
Vendor: | |
SKU: |
FUR-2526 |
Weight: |
0.38 lb |
Product Spare Parts
I would not recommend if you have any sort of upgrades on your ascent. Don’t waste your money. After i went back and forth with tech support they stopped replying not resolving my issue now I’m stuck with a motor that isn’t even capable with my built ascent 18.
This kit has all you need to go brushless. Get your slow crawl in!!
Fit perfect, no modifications needed. Slow crawl and drag brake are great.
Perfect!!
I would not recommend if you have any sort of upgrades on your ascent. Don’t waste your money. After i went back and forth with tech support they stopped replying not resolving my issue now I’m stuck with a motor that isn’t even capable with my built ascent 18.
This kit has all you need to go brushless. Get your slow crawl in!!
Fit perfect, no modifications needed. Slow crawl and drag brake are great.
Perfect!!