The Booma-RC Certified Power Switch has been designed with Giant scale models in mind. The switch contains a printed circuit where the 4 pole switch is mounted. All wires are soldered to the circuit board not directly to the switch to give the highest possible vibration resistance.
The switch harness connects directly to the battery to the receiver by way of an on/off position. They also allow you to charge the receiver battery without removing it from the model.
DSC and 2.4 GHz matching functions are supported.
Specifications Booma-RC Certified for Giant Scale Models Heavy-Duty 22AWG cables GOLD connectors Heavy-Duty double-pole, double throw switch with 4 redundant contacts Built-in charge jack DSC-compatible Available with JR (also fits Hitec, Airtronics-Z), Futaba-J connectors. Overall dimensions: 1-3/8 L x 9/16 W x 3/4 H Weight: 0.8oz
Should be Zero Star - Switch quality will not fully switch on
These expensive switches look good at first - good connectors, wire etc.
BUT the design prevents the switch from fully enguaging in the on position and the slightest force or vibration will result on it from not making positive contact
would be a crash for sure if I hadn't discovered this issue
this wass the same on all four switches I checked so not a one off - looks like a dust/splash shield between the switch and the outer fase is not open enough to all the switch to fully move completely to the detent position
D
Dave B.
Lipo Switches
These are the best you can get. Never had one fail. Use in my high end planes
K
Kevin C.
Lighted switch
Nice on/off switch with light so you know when its on or off