Kraken 580 Rear Fullsize Servo Support
Includes:
- 1 x Rear Standard Servo Mount
- 2 x Head Cap Screw M2.5x8mm
- 2 x Finishing Washer M2.5
- 2 x CF Servo Spacer
Used for:
- Goblin Kraken 580/RAW 700
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
H1207-S |
| Weight: |
0.13 lb |
Product Spare Parts
Electronics
Customer Reviews
Should be included I the Kit. 🙈
Great idea to be able choose servo size.
Worked out great for full size kST servo. A+
My KST 815V2 full size servo mounted with a slight issue. The servo did not sit flat on the support. So I had to make sure that the servo was parallel before I tighten the mounting screws.
works great if you want full size servos
This item is a must have if using full size servos on the SAB Kraken 580 Kit, especially if you plan on going with a 12S system and 600mm main blades.
Not much to say other than it's a full size servo bracket
Customer Reviews
Should be included I the Kit. 🙈
Great idea to be able choose servo size.
Worked out great for full size kST servo. A+
My KST 815V2 full size servo mounted with a slight issue. The servo did not sit flat on the support. So I had to make sure that the servo was parallel before I tighten the mounting screws.
works great if you want full size servos
This item is a must have if using full size servos on the SAB Kraken 580 Kit, especially if you plan on going with a 12S system and 600mm main blades.
Not much to say other than it's a full size servo bracket