Join Our newsletter
Subcribe to get information about products and coupons





Couldn't load pickup availability
Equipped with a 4282 high-torque 2600KV magnetic encoding FOC sensored motor, featuring a high-speed digital sensor that requires no calibration, the motor is plug-and-play. The sensor supports hot-swapping with strong anti-interference and high signal quality.
The FOC ESC supports 2-4S batteries with a continuous current of 140A, utilizing vector control technology. Compared to square wave ESCs, it saves 5%-20% energy, providing longer run times for climbing adventures. The acceleration and deceleration performance of the FOC ESC is over twice as fast as square wave models.
The high-torque motor meets the needs of most large-scale crawlers on the market. Its low-speed linear torque compensation allows the vehicle to easily overcome obstacles while maintaining perfect balance. The vehicle excels not only in climbing scenarios but also in sand running and drift, offering users an ultimate control experience.


Treated with a high-gloss coating not only enhance the ruggedness of the car but also add to the overall aesthetics of the vehicle

Drive train design reduces the lateral swing between the chassis plates (body) and the rear axle, making the car more stable on bumpy roads and more stable when driving straight

Extra-long 120mm all-metal hydraulic shock absorbers, with a maximum shock absorption stroke of 37mm provide smooth dampening of the vehicle even on rougher surfaces

High-strength integrated nylon mudguard and inner fenders include locations to install rock lights by the user easily

MK-07's main battery tray holds a full-length 5000mAh 3-cell LiPo for extended runtime. Bundled battery straps to accommodate batteries of different heights

When the terrain becomes more challenging, locking the rear differential or locking the front differential will allow the tires to obtain better power distribution and allow the vehicle clear the obstacle easier.

The steering linkage and traction linkage are mounted high on the door axle, elevating them to prevent possible damage. This allows the MK-07 to attack obstacles head-on, thus reducing the risk of the steering linkage hitting rocks.

The entire vehicle suspension link rods uses thickened 8mm stainless steel to make the chassis more robust.

A slipper clutch design provides additional protection for the crawler under extreme conditions. This helps prevent any possible damage to the gears and the motor.
Sealed Ball Bearings
The whole vehicle uses rubber-sealed dustproof high-speed bearings which reduce penetration from mud and sand and allow for a more fluid operation.

The MK-07 features a 58° out-of-the-box approach angle for climbing walls and hills. 54° rear approach angle provides extreme performance even in the deepest ruts.

The MK-07 has a center ground clearance of up to 90mm, which brings a more realistic off-road experience without fear of any complicated environment.

The MK-07 has a self-adjusting steering angle of up to 45°, which makes it easy to maneuver around even the tightest corners.

The MK-07 portal axle design raises the driveshaft to improve axle geometry and reduce driveshaft angles.Higher driveshafts and suspension links go over obstacles, reducing wear and smoothing the ride over bumpy roads.

The motor front mount design moves the weight bias forward, allowing you to climb obstacles with better traction.

Its body-mounted door handles, mirrors, fenders, and simulated windshield wipers work together to create an extremely realistic appearance.

Front lights with daytime running, low and high beams, roof light (light bar) and turn signal lights, grille and top panel lights.

The simulated design bumper fitted to the front vehicle is robust and functional, complete with tow hooks, metal grain and other details to give it a more realistic appearance.

MK-07 tire diameter of 145mm, tire width of 58mm to bring model players more realistic off-road experience, with the ability to challenge the complex road conditions.

The unique windshield and integrated mirrors and wiper blades have been rebuilt as injection-molded parts to provide a more realistic visual experience when mounted on the car.

The whole car is equipped with a number of lighting effects, enthusiasts can set the lighting display effects according to the use of the scene, simulating the real driving environment.

Supports up to 3S Lipo Battery (3 Cell)
Neodymium Iron Boron Strong Magnetic Magnet
High Torque 5280 brushed Motor
Capable of pulling a 1-2 tonne vehicle across a horizontal surface

140A Continuous output
Ultra-low-speed linear control

40KG high-torque waterproof steering servo provides strong power output and reliable waterproof performance, ensuring stability and durability in a variety of extreme conditions.

Featuring a 2,4g 8-channel color screen remote control that can be adjusted to fit your usage habits, such as using the transmitter to set the MK-07's speed, then using the multi-function knob to fine-tune the speed to be faster or slower to match your pace. A handle-mounted switch selects high or low gear to suit the terrain, while a separate toggle switch engages or disengages the locking differential, all on the fly.
Note: Some parameters may differ between versions.
| Vendor: | Rlaarlo |
| SKU: | MK07W-BS |
| Barcode: | |
| Availability: | In Stock |
| Product Type: | Car Kits |
| Weight: | 36.0 lb |
Thanks for subscribing!
This email has been registered!