NSDRC RS100 HIGH TORQUE MICRO SERVO - BLACK * As of April 2nd 2023, the RS100 has been upgraded! With a new motor and gears, it now has even more power, lower amp draw, and now with a magnetic angle sensor for superior...

Description : - Use for CR18P EVO/ EVO PRO/ JUICE UP - 1 x Steel U-Joint Drive Shaft Set 

*** Furitek Esc is not compatible with HRZ00015 Board *** Features:- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)- FOC (Field-oriented control) technology.- Plug & Play designed for AXIAL SCX24 crawlers.- 5V/ 6.5V 2.5A Built-in BEC (config via...

Description : - Use for CR18P EVO/EVO PRO/CR-18P 2024/JUICE UP - 1 set HobbyPlus Aluminum High Clearance Link ( Black )

Special Edition Purple RS100M Micro Servo & Horn  1 x Purple RS100 Servo 1 x Purple Aluminum Horn with M1.4 threads  * As of April 2nd 2023, the RS100 has been upgraded! With a new motor and gears, it now has more power!  Operating...

  Special Edition Red RS100M Micro Servo & Horn  1 x Red RS100 Servo 1 x Red Aluminum Horn with M1.4 threads  * As of April 2nd 2023, the RS100 has been upgraded! With a new motor and gears, it now has more power! ...

The RadioMaster ER5C-i receiver is based on the high-performance, revolutionary ExpressLRS system, featuring high reliability, highly flexible configuration, ultra-fast response speeds, and an ultra-long receiving range, bringing with it a brand-new usage experience. The ER5C-i ELRS receiver can drive up to 5 servos and...

Description : - Use for CR18P EVO PRO/CR-18P 2024 - Machined Overdrive Portal Gears 20%

  Manual Download Overview This multifunction program box is for programming HOBBYWING brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable...

Description : - Use for CR18P-EVO/ EVO PRO/JUICE UP - 30pcs Rubber Seal Bearings

Description : - Use for CR18P EVO/EVO PRO/JUICE UP  - 1 set x Optional Aluminum SOA Conversion

*** Furitek Esc is not compatible with HRZ00015 Board *** Features:- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)- FOC (Field-oriented control) technology- Plug & Play designed for AXIAL SCX24 crawlers- 5V/ 6.5V 2.5A Built-in BEC (config via...

FEATURES:- Brass Pinion 15T for higher speed on SCX24- 3mm shaft size- 0.5 Module- Suitable for all SCX24 2204 motors- Made by high quality brass- M3 set screw included

ER5C V2 receiver is based on the high-performance, revolutionary ExpressLRS system, featuring high reliability, highly flexible configuration, ultra-fast response speeds, and an ultra-long receiving range, bringing with it a brand-new usage experience. The ER5C V2 ELRS receiver can drive up to 5 servos and...

HobbyPlus Speck B 1/24 2WD RTR Buggy Brushed and Speck B Brushless Versions The Speck B is a true 1/24-scale RC cars, 2WD Ready-to-Run buggy developed for compact racing, backyard bashing and hands-on chassis tuning. The lineup combines a low-center-of-gravity aluminum chassis, oil-filled long-travel...

Only compatible with: Furitek FX118 Fury Wagon and FX118 Katana

HobbyPlus Rear Portal Hub  Brass Weight  V2 use for CR18P EVO PRO/EVO/JUICE UP

Description : - Use for CR18P EVO/ EVO PRO/ JUICE UP - 1 set Metal Transmission Gear

HobbyPlus Fighter LCG Clear Body use for CR18P EVO PRO & CR18P EVO