-
PAU 70cc Ultra flexible Carbon Fiber Landing Gear
SKU : PAUP-330LX-70-LG- $147.95
- $147.95
- Unit price
- per
-
Oracover 21-091 2M Silver
SKU : BRP-21-091-2M2M x 600mm roll of genuine Oracover 21-091 Silver covering used on Boomerang RC Jets- $38.99
- $38.99
- Unit price
- per
-
Oracover 21-071 2M Black
SKU : BRP-21-071-2M2M x 600mm roll of genuine Oracover 21-071 Black covering used on Boomerang RC Jets- $38.99
- $38.99
- Unit price
- per
-
Oracover 21-052 2M Dark Blue
SKU : BRP-21-052-2M2M x 600mm roll of genuine Oracover 21-052 Dark Blue covering used on Boomerang RC Jets- $38.99
- $38.99
- Unit price
- per
-
Oracover 21-023 2M Ferrari Red
SKU : BRP-21-023-2M2M x 600mm roll of genuine Oracover 21-023 Ferrari Red covering used on Boomerang RC Jets- $38.99
- $38.99
- Unit price
- per
-
Oracover 21-010 2M White
SKU : BRP-21-010-2M2M x 600mm roll of genuine Oracover 21-010 White covering used on Boomerang RC Jets- $38.99
- $38.99
- Unit price
- per
-
Zavionix RDT Unit for Xicoy V10
SKU : ZA-RDT-V10Includes: - RDT Unit x 1pc Used for: - Xicoy V10 (Merlin, Kingtech G1, Jetcentral pre-SE, ATJ and more)- $59.00
- $59.00
- Unit price
- per
-
Heavy Duty Jet Fuel Fitting Clunk (3/16")
SKU : JT-HD-CLUNKHeavy duty Jet fuel fitting clunk with .1875 (3/16) I.D. hole. Measures 2.25" x .5" dia. Weighs 1.5 oz.- $12.50
- $12.50
- Unit price
- per
-
PennBag Wing Bags for Boomerang Turbinator 2
SKU : pbag-tbn2Protect your Turbinator 2 wings with PennBags! Double protection with a heavy duty quilted outside, with soft flannel on the inside! PENNBAGS ARE MADE IN THE USA!- $120.00
- $120.00
- Unit price
- per
-
Boomerang Elan V2 Canopies - Black
SKU : BRP-ELN-CNP-BKReplace canopy for Elan V2 Black Colorcategory-jets,category-jets-brand-boomerang-rc-jets,category-jets-brand-boomerang-rc-jets-model-elan-v2,category-jets-brand-boomerang-rc-jets-model-elan-v2-model-elan-v2- $45.00
- $45.00
- Unit price
- per
-
SAB AVIO DRAKE/HAVOK LANDING GEAR AXIS
SKU : S0102-SIncludes: Landing gear AXIS x 1 set Use for: K175 Drake/M169 Havok- $19.00
- $19.00
- Unit price
- per
-
Push-in fitting QSM-M5-4
SKU : 153304SizeMini Nominal width2.2 mm Tubing insertion depth11.5 mm Type of seal on screwed plugSealing ring Mounting positionAny DesignStraight design Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar...- $5.55
- $5.55
- Unit price
- per
-
Barbed tubing connector RTU-PK-4/6
SKU : 7604Nominal width3.4 mm Operating pressure for entire temperature range-0.095 MPa ... 1 MPa Operating pressure for entire temperature range-0.95 bar ... 10 bar Operating pressure for entire temperature range-13.775 psi ... 145 psi Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating...- $6.25
- $6.25
- Unit price
- per
-
Barbed tubing connector RTU-PK-4/4
SKU : 4806Nominal width3.4 mm Operating pressure for entire temperature range-0.095 MPa ... 1 MPa Operating pressure for entire temperature range-0.95 bar ... 10 bar Operating pressure for entire temperature range-13.775 psi ... 145 psi Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating...- $5.00
- $5.00
- Unit price
- per
-
Boomerang 120cc UAT Mount set of 2
SKU : UAT-120-MTUAT mount for the composite Boomerang RC 120cc UAT's. Securely mount the Boomerang UAT in your RC Gas Turbine Aircraft with confidence. Mount clamps over the UAT with 2.5mm screws and nuts (provided). Set of 2.- $7.99
- $7.99
- Unit price
- per
-
Kingtech Turbine Filter Mount
SKU : KT-FLTR-MTFilter mount for the Kingtech RC gas turbine fuel filters. The filter is held in the mount with the provided zip ties. Mount includes two small sheet metal screws for mounting into the fuselage.- $4.99
- $4.99
- Unit price
- per
-
IC3 Female Surface Connection Mount (2 Each)- Black
SKU : IC3-FSM-2The IC3 connector mount will securely affix Spektrum IC3 Female connectors allowing for easy insertion of the male battery connector. The mount is designed for surface top mounting and includes a template for cutting the opening. and a faceplate. The mount may be fastened...- $6.99
- $6.99
- Unit price
- per
-
Fuel Line Holders 6mm (single) PKG 10- Black
SKU : FLH-6S-10Fuel Line Holder. Expertly designed for convenience and efficiency, Our 3D printed Fuel Line Holder is perfect for fuel line routing. Say goodbye to tangled lines and your turbine installations. Available in 4mm and 6mm sizes Sized to fit 4mm and 6mm Festo Tubing...- $5.00
- $5.00
- Unit price
- per
-
Festo 4mm Ball Valve Mount- Black
SKU : FT-4BV-MTDesigned to securely mount Festo or Pisco 4mm ball valves into any RC Gas Turbine Aircraft. The mount can be glued and screwed into place. Valve is secured to the mount with one zip tie that is provided. Ball Valve Not Included- $3.99
- $3.99
- Unit price
- per
Join Our newsletter
Subcribe to get information about products and coupons.
