Remark Narrow frequency lock tail servo,Steer gear,Metal case Motor Type Brushless Motor 17*18mm Operating Frequency 760us/333Hz Torque,Speed,Size 18Kg.cm/0.08sec/60°@6.0V22Kg.cm/0.07sec/60°@7.4V25Kg.cm/0.06sec/60°@8.4V55×37.5x20mm  

All RXC42-X Series Glue stick or ultrasonic welding 21.4*14.5*6.5mm

GDW-G20 GDW G20 10KG High Torque High Speed Metal HV Digital Brushless Micro Servo Compatible with 250 to 420 size 3D helis   Features:   Race-class helicopter steering gear Helicopter high-speed digital steering gear Stainless steel output teeth, double bearings Tough and wear-resistant Quick response,...

Description: The specified current is the maximum continuous full power current with adequate cooling. - 2 to 4s LiPo, with under voltage protection by power reduction. - 6 to 12 cells NiMH, with under voltage protection by power reduction. - disconnectable under voltage detection....

Description GDW G55 HV Digital Tail Servo Mini Size Servo Operating voltage range: 4.8V - 8.4VWorking frequency: 760µs / 333Hz Dimensions: 36mm (48mm) x 15mm x 32mmWeight: 47g ± 1g Bench test values:5.0kg.cm/0.06sec/60°@6.0V6.0kg.cm/0.05sec/60°@7.4V7.0kg.cm/0.045sec/60°@8.4V Dead band: 2µs Motor type: Brushless motor 17mm x 15mmHorn gear...

MXO-RACING Micro Surface RX (Suitable for 1/72 and 1/87) Protocol: FUTABA-SFHSS Specification: Size: 10.0*12.5*2.5mm Work Volt: 3.3-5.0V Built-in 3A, Bidirectional ESC: Yes Num of light control channels: 7

It contains the power switch. Power ON/OFF: Press and hold power button for 3 seconds.LED shows battery status and capacity.While no charging and discharging after power on, the power will automatically shut down after 10 minutes.With short circuits and reverse polarity portection to prevent...