Smooth flite, like flying on a calm day Welcome to the world's lightest and most advanced 26 channel Gyro and Power distribution system. SmoothFlite - Giant Scale RC flying just got better.  We have focussed extensively on the user experience being ultra simple-to-use and all reports...

Welcome to the new generation of EXTREME Redundant Receiver Power Expanders. EXTREME RRS is a high powered servo distribution system designed for extreme 3D and IMAC flying. It boasts dual (or single) receiver inputs for receiver redundancy, 16 freely assignable channels with servo matching, servo reversing,...

Welcome the AR Multi-Switch. We have taken the power switching system from our pinnacle product the AR SmoothFlite and ARXL systems and encased it in a small stylish light-weight aluminium case design that is completely modular in switching and input/output options. The new Multi-Switch...

The AR Reg Switch is the next level in regulator and switch design, small sleek and powerful. The Reg switch will take any battery type and regulate it down to 6.0v for your receiver and servos. *Also available in 5 volt and 7.2volt version...

Enjoy turning you model ON and OFF via the magnetic switch. Designed to be mounted inside your model. Its low profile design and light weight allows it to be mounted anywhere on the inside of the model. The Mag switch uses hall sensor effect...

Enjoy turning you model ON and OFF via the remote key FOB. This is great for a true scale model ap-pearance and will be a great conversa-tion piece at the field. To operate the Remote Smart Switch you simply connect the Remote receiver module...

Allows owners of Smooth Flite ARXL, Smooth Flite Spektrum, Smart Bus RRS ARXL to update to the latest version.  Requires loader version 1.2 or 1.3. Contact us for details if unsure. please note this product is NOT comptible with Smart Bus Extreme, Smart Bus Extreme...

The Booma-RC Certified Power Switch has been designed with Giant scale models in mind. The switch contains a printed circuit where the 4 pole switch is mounted. All wires are soldered to the circuit board not directly to the switch to give the highest...

G82198 AMP 30 Transmitter & Receiver 2.4 ghz

Features: - Using the newest Hall Sensor Technology- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Fully New Design Steel Gear Train for Maximum Strength- 8.4V High Voltage Ready- Optimized for Heli, Airplane & Jet Aircraft- 6 Ball Bearings Construction Speed: 0.07...

Features: - Using the newest Hall Sensor Technology- Blistering 0.035 Second Transit Speed- Dedicated Helicopter Rudder Servo- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Newly Design Steel Gear Train for Maximum Strength- Excellent Thermal Dissipation via Finned 6061 Aluminum Case- 8.4V...

All RXC42-X Series Glue stick or ultrasonic welding 21.4*14.5*6.5mm

MXO-RACING Micro Surface RX-G (Built-in GYRO, for 1/28 and 1/24) Protocol: KO-ASF Specification: Size: 12.0*18.6*7.2mm Reaction Time: 4.1ms Work Volt: 3.7~8.5V Built-in GYRO: Yes GYRO Sensitivity and Direction SETUP: Yes EndPont: Yes

MXO-RACING Micro Surface RX-G (Built-in GYRO, for 1/28 and 1/24) Protocol: KO-FHSS Specification: Size: 12.0*18.6*7.2mm Reaction Time: 3.85ms/7.7ms Work Volt: 3.7~8.5V Built-in GYRO: Yes GYRO Sensitivity and Direction SETUP: Yes EndPont: Yes

MXO-RACING Micro Surface RX (Suitable for 1/72 and 1/87) Protocol: FUTABA-SFHSS Specification: Size: 10.0*12.5*2.5mm Work Volt: 3.3-5.0V Built-in 3A, Bidirectional ESC: Yes Num of light control channels: 7

MXO-RACING Micro Surface RX (Suitable for 1/72 and 1/87) Protocol: FLYSKY-AFHDA-2A Specification: Size: 10.0*12.5*2.5mm Work Volt: 3.3-5.0V Built-in 3A, Bidirectional ESC: Yes Num of light control channels: 7

FURITEK high quality JST-RCY to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc.  This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors. Application: For lipo batteries that have red JST-RCY...

FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors. Application: for lipo batteries that have XT30 connectors to...

FURITEK high quality 2-to-3-pin jst to jst conversion cable is designed to support plug and play of LIZARD ESCs to motors. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.Application: for brushed motors that have 2-PIN Female...

G82198RX AMP30 2.4GHz 3 Channels Receiver (RX)