Includes: - Futuba Gear Type Micro Cyclic Servo Arm 5mm spline 21T (big hole) x 3pcs - Futuba Gear Type Micro Cyclic Servo Arm 5mm spline 21T (small hole) x 3pcs - Futuba Gear Type Midi Tail Servo Arm 6mm spline 25T x 1pc...

Key Features: 6-Inch Remote Receiver Extension   Overview: This is the cable that runs between the main receiver and the remote (satellite) receiver. This cable has a female connector on both ends. If you wish to lengthen your remote receiver cable please see the...

User Manual > Manual_Platinum-80A-V5.pdf Product Catalog >  Platinum  80A V5 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...

Includes: 2 * Main Shaft 2 * M2*10-L4 Bolt Used for: Goosky S2 MAX Helicopter    

Includes: - 1 x Rear Standard Servo Mount - 2 x Head Cap Screw M2.5x8mm - 2 x Finishing Washer M2.5 - 2 x CF Servo Spacer Used for: - Goblin Kraken 580/RAW 700 category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-raw-700n,category-helicopter-brand-sab-heli-division-model-raw-700n-options-frame-parts

Include: Main Grip * 1 Ball Bearing * 3 Use for: Goo-sky S1

Specifications: Item: 2S 7.4V 6200mAh LiPo BatteryNominal Voltage: 7.4VCapacity: 6200mAhWatt Hours: 45.88WhConnector: JST-XH and XT30Charge current: Max 2ADimensions: 85mm x 50mm x 21mmWeight: 203gFits RadioMaster Boxer and TX16S series Dimensions Weight Package Contents 1 * 2S 7.4V 6200mAh Lipo Battery

Description : - Use for CR18P EVO PRO/CR-18P 2024 - Machined Overdrive Portal Gears 20%

The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control, also benefits from the enhanced level of high...

Package includes: C032 Battery (Type-C charging port) * 1 Used for: RC ERA C032 UH1 Helicopter

Includes:- Goo-sky Bluetooth Module x 1pc Used for:- Goo-Sky S2 / S1

Includes: 1 * Tail Boom Mounting Block 1 * M1.6x4mm Screw 2 * M2x7mm Screw Used for: Goosky S2 MAX Helicopter

Include: 1 set Battery Used for: C184 100 Size MD500 4CH Helicopter Kit

The O.S. #8 glow plug is the most widely used O.S. glow plug.Recommended for most current O.S. (and other brands of) 2-stroke R/C engines. FEATURES: Medium heat range plug for most model engine applications.Plug is medium length, without idle bar. For all 2 stroke...

Includes: - 1 x Front Standard Servo Mount. - 3 x Head Cap Screws M2.5x8mm - 4 x Servo Spacer Used for: - Goblinu00a0Kraken 580category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-raw-700n,category-helicopter-brand-sab-heli-division-model-raw-700n-options-frame-parts

Include: Landing Skid * 1 Screws set * 1 Use for: Goo-sky S1    

Includes: 1 * Landing Skid 4 * ST1.7*8PB Screw Used for: Goosky S2 MAX Helicopter

Includes: - RAW420 Swashplate Leveler x 1pc Use for : - RAW 420

Included: Tail Shaft x 1 Use for: Goosky RS4    

  Manual Download Overview This multifunction program box is for programming HOBBYWING brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable...