You can configure your flybarless unit directly from JETI Duplex transmitter remotely without need of computer! This cable is used for connecting Spektrum SRXL2 receivers too. With Spirit GT this cable is required only when connecting Spektrum SRXL2. You do not need to buy anything else, only Jeti EX Bus...

You can configure your flybarless unit directly from Graupner HoTT transmitter remotely without need of a computer! You do not need to buy anything else, only HoTT compatible receiver is needed. Open for wide usage, without any limitations. Telemetry and configuration of the unit in real...

You can configure your flybarless unit directly from OpenTX-based transmitter remotely without need of computer! This solution is working from firmware 2.2.0 through PWM, PPM and S-BUS protocols. You do not need to buy anything else, only S.PORT compatible receiver is needed. Not needed with Spirit GT units. Open...

Spare receiver cables for the conventional connection with a receiver. Length: 15 cm Great durability High quality

Spare USB interface for configuration your unit with the PC software. Length: 1 meter Great durability PC software available on the web

Cable for telemetry transmission between Castle Creations Phoenix Edge and Talon ESCs.Can be interfaced with all Link Live enabled ESCs. Data can be displayed and logged directly in transmitters such as: JETI Duplex FrSky Taranis and Horus Graupner HoTT Cable length: 4 cm Designed for...

Cable for telemetry transmission between HobbyWing V4, HobbyWing V5, Scorpion Tribunus ESCs, Kontronik JIVE. Data can be displayed and logged directly in transmitters such as: JETI Duplex FrSky Taranis and Horus Graupner HoTT Futaba FASSTest Cable length: 22 cm ESC Telemetry guide: Wiki pages.

Cable for telemetry transmission between Kontronik KOSMIK, JIVE PRO and KOLIBRI ESCs. Data can be displayed and logged directly in the transmitter. Available for: JETI Duplex Spektrum Futaba FrSky Graupner HoTT Cable length: 22 cm NOTE: This cable is utilizing the primary Spektrum satellite port. ESC Telemetry Guide

Cable for μSpirit units To connect your servo or any servo cable with μSpirit units you can use this adaptor cable. It can be used to connect: Servos with Servo connector USB interface Wifi-Link Bluetooth module Jeti integration cable HoTT integration cable FrSky interation cable...

Cable for μSpirit units To connect your receiver with μSpirit units you can use this adaptor cable. Cable length: 65 mmRecommended current: 1.5 A (max. continuous)

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites. Cable length: 22 cm 

Great choice for connecting two servo cables into the one port. Can accept both JR and Futaba connector! Wire gauge: 0.50 mm2 (24 AWG)Cable length: 10 cm (+2.5 cm connector housing)Recommended current: 12 A (max. continuous)

High quality double sided tape for GeoLink modules. Perfect for super strong mounting at the model. Quantity: 2 pcsThickness: 1.1 mmDimensions: 45x26 mmTemperature range: -30°C až +150°C

Perfect double sided tape for Spirit 2 and Spirit RS unit. Perfect for vibration dampening Thickness: 1.1 mmDimensions: 27x130 mmTemperature range: -30°C až +150°C

Perfect double sided tape for Spirit GT and Spirit GTR units. Perfect for vibration dampening Quantity: 4 pcsThickness: 1.1 mmDimensions: 30x34 mmTemperature range: -30°C až +150°C

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites. Cable length: 50 cm 

[Stall torque]  4.8 (6.6V)/ 5.4 (7.4V)/ 6.1 (8.4V)kg・cm                     65.8 (6.6V) / 74.9 (7.4V) / 85.1 (8.4V)oz・in[Speed]         0.04 (6.6V)/0.03 (7.4V)/0.03 (8.4V) Sec/60°[Weight]        63.8 g / 2.25 oz[Measurement]  40 x 20 x 40.45 mm / 1.38 x 0.79 x...

YGE ESC's have been known to provide reliable performance in the most demanding electric applications in sailplanes, airplanes, and helicopters. As telemetry support continues to improve within the R/C industry, YGE now has implemented on-board Telemetry items for radios which support it.   Built on a...

Cable for connecting Spektrum SPM4650T, SPM4651T and SPM9747 satellites at the SAT1 and SAT2 ports. Available for µSpirit, Spirit Pro and Spirit 2 units Cable length: 22 cm Wiring details: Wiki Guide

Cable for telemetry transmission between OMP Hobby ESCs such as OMP M4. Supported telemetry variables are: Battery Voltage Battery Current Consumed Capacity ESC Temperature Headspeed Cable length: 35 cm ESC Telemetry guide: Wiki pages.