SPECIFICATION: 719 Angular Contact Ball Bearing (1PSC) category-helicopter,category-helicopter-brand-xl-power-heli,category-helicopter-brand-xl-power-heli-model-specter-700,category-helicopter-brand-xl-power-heli-model-specter-700-model-specter-700

This is a set of twenty RCPROPLUS 5mm Bullet, 24K Gold Flash Coated Connectors. This package contains ten male and ten female connectors. RCPROPLUS inline bullet connectors are a great solution for your high current and high voltage demands. These 24K Flash coated connectors...

Product: Package: Instruction: Specification: ●Use for T-REX 700N/700E/800E。●Dual radial bearing with thrust bearing design to dramatically increase rudder precision and gyro locking action.●Must with Torque Tube Rear Drive Gear Set (HN7042B). ●Metal tail rotor holder x 2●700 Tail rotor hub x 1●Tail rotor washer x...

-

TORQ CL0508 Black Edition Micro HV Servo - Power, Performance & Pure Domination. Optimized for second to none power & performance, TORQ brings forth a micro servo that is ready & able to push the boundaries of the micro servo world.Designed specifically for high...

Includes:  C190 7.4V 1200Mah Battery *1pc Used for: RC ERA C190 H145 150 Size Gyro Stabilized RC Helicopter - RTF

By fitting this part at this end of the tail boom opening, the tail boom will not deform in any way when locking the fuselage to clamp the tail boom screws, providing a strong support effect and dramatically increasing the core strength of the...

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (5.0/6.0/7.4 V) with a continuous current of 5A and a maximum of 15A. The voltage specifications allow the use...

Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered!Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting...

Includes:- Canopy Fixing Columns Set x 1 Used for:- Goo-Sky S2    

For Aircraft Models T-FHSS Air SIZE:24.9 mm x 47.3 mm x 14.3 mm WEIGHT:10.1 g RATED VOLTAGE:DC 4.8V~7.4V OPERATING VOLTAGE:DC 4.0V~8.4V

EGODRIFT Tengu high-performance brushless motor for RC Heli are the result of one year of development and testing. The 4530HT Tengu comes with a kV rating of 550kV and fits all 700mm class helicopters, such as the XLPower Spectre 700, SAB Goblin 700-770, Quest...

Includes: - 1 x Carbon Device Support - 1 x Carbon Pin Support - 1 x Head Cap Screw M2.5x12mm - 2 x Head Cap Screws M2.5x8mm - 5 x Flat Cap Screws M2.5x5mm - 1 x Aluminum Battery Block - 1 x Brass...

u00a01 x Motor Pulley 23T u00a02 x Cone Point Set Screws M4x4category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-kraken-580,category-helicopter-brand-sab-heli-division-model-kraken-580-options-frame-parts

Description: Length: 610mm Width: 57mm Root Size: 12mm Hole Diameter: 4mm

Product: Package: Instruction: Specification: ●Use for T-REX 600E PRO / 600EFL PRO.   ●Tail Control Guide x 1(Φ21.5xΦ26x46.85mm)●Carbon Tail Control Rod x 1(Φ2.1xΦ5x626mm)●Socket button head self tapping screw x 1(T4x10mm)●Ball Link x 2

Includes: 470LT Torque tube x 1(u03a63xu03a64x424mm)450 PRO Torque tube end x 2(u03a64x24.5mm)470LT Torque tube bearing holder x 1(u03a68xu03a612.7x8mm)Bearing MR84ZZ x 1(u03a64xu03a68x3mm) Use for: T-REX 470LTcategory-helicopter,category-helicopter-brand-align,category-helicopter-brand-align-model-t-rex-470l,category-helicopter-brand-align-model-t-rex-470l-options-tail-parts

H0538-S - Steel Ball linkage M2 - Goblin 380 Includes: - Steel Ball linkage M2 x 5pcs Use for: - Goblin 380category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-raw-700n,category-helicopter-brand-sab-heli-division-model-raw-700n-options-head-parts

Include: Goosky RS7 Quick Release Module * 1 Used for: Goosky RS7    

Product: Package: Instruction: Content: ●Suitable for TB40. ●TB40 Main Shaft x 1(Φ5.6xΦ10x150.6mm)●Socket collar screw × 2(M2.5x15mm)●M2.5 Nut × 2●Spacer × 1(Φ8xΦ12x0.2mm)