Surface mount for the Bavarian Demon Cortex Pro gyro. Enhance your RC Gas Turbine Jet aircraft's performance with the Bavarian Demon Cortex Pro Surface Mount. This surface mount is specifically designed to improve stability and ease of mounting. 

Screen Connection mount with a 200mm extension for use with Advanced Radio, Booma RC systems. This mount and extension will allow easy connection of the AR screen for those who do not want to mount the screen into the airframe.  Works with all Advanced...

Our Advanced Radio SF10 mount is designed to quickly and securely mount the Smoothflite SF10 to your RC Gas Turbine Jet airframe with ease. The SF10 is secured by TWO snug clamps on top of the mount. The clamps are attached with 3mm flat...

These mounts are designed specifically for the female Booma RC AR1 Pigtail by Advanced Radio, compatible with RC gas turbine aircraft. Choose from Flush Mount or a 90-degree side Mount. Each pack includes two mounts. Mounting bolt hole size is 2mm.

Valve function2/2 bistable Pneumatic connection 1QS-6 Pneumatic connection 2QS-6 Actuation typeManual Type of mountingLine installation Normal nominal flow rate (normalized to DIN 1343)533 l/min Nominal width4 mm Operating pressure-0.1 MPa ... 1 MPa Operating pressure-1 bar ... 10 bar Ambient temperature0 °C ... 60...

Nominal width3.4 mm Operating pressure for entire temperature range-0.095 MPa ... 1 MPa Operating pressure for entire temperature range-0.95 bar ... 10 bar Operating pressure for entire temperature range-13.775 psi ... 145 psi Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating...

Nominal width3.4 mm Operating pressure for entire temperature range-0.095 MPa ... 1 MPa Operating pressure for entire temperature range-0.95 bar ... 10 bar Operating pressure for entire temperature range-13.775 psi ... 145 psi Operating mediumCompressed air as per ISO 8573-1:2010 [7:-:-] Information on operating...

SizeMini Nominal width2.1 mm Tubing insertion depth12 mm Type of seal on screwed plugSealing ring Mounting positionAny DesignStraight design Pack size10 Structural designPush-pull principle Operating pressure for entire temperature range-0.095 MPa ... 0.6 MPa Operating pressure for entire temperature range-0.95 bar ... 6 bar...

K-142G5 SPECIFICATIONS Diameter: 92.25mm / 3.63” Length: 235mm / 9.25” Weight: 1300g / 2.86lb Maximum RPM: 142000 Thrust: 14kg @ 15°C / 30.86lb @ 59°F EGT: 750°C max Pump Type: Digital Sbus brushless pump KP600DP Battery: 11.1V Lipo ( At least 2200mah 35C )...

K-130G5 SPECIFICATIONS Diameter: 94.5mm / 3.72” Length: 220mm / 8.66” Weight: 1200g / 2.64lb ( 1270g including brackets) Maximum RPM: 142000 Thrust: 13kg kg @15°C / 28.6lb @ 59°F EGT: 700°C Pump Type: Digital Sbus brushless pump KP500DP Battery: 11.1V Lipo ( At least 2200mah 35C...

UAT(Ultimate Air Trap) 110ML Standard 6061 Aluminum Alloy + Polycarbonate(PC) Whole Nitrile Butadiene Rubber(NBR) Seal Standard G1/8 Copper Nickel Threaded Joint Replaceable 304 Stainless Steel Strainer

Description: • KingTech G4 utilizes SBus data transmission. • Engine/ECU integration, all operating parameters including total run time are all recorded into the engine. • The smaller and lighter external Data Relay Module (DRM) is responsible for all data, signal and power transmission. •...

2M x 600mm roll of genuine Oracover 21-060 Orange covering used on Boomerang RC Jets

Protect your Sprint V2 wings with PennBags!  Double protection with a heavy duty quilted outside, with soft flannel on the inside! PENNBAGS ARE MADE IN THE USA!    

Canopy replacement for Boomerang Turbinator 2category-jets,category-jets-brand-boomerang-rc-jets,category-jets-brand-boomerang-rc-jets-model-turbinator-2,category-jets-brand-boomerang-rc-jets-model-turbinator-2-model-turbinator-2

3 Piece CF Wing Tube set for Boomerang RC Jets "Turbinator 2" Set includes 2 wing tubes for the Wings and 1 wing tube for the Horizontal Stabs category-jets,category-jets-brand-boomerang-rc-jets,category-jets-brand-boomerang-rc-jets-model-turbinator-2,category-jets-brand-boomerang-rc-jets-model-turbinator-2-model-turbinator-2

***comes with Barb Style Connectors***   The new iTrap CLASSIC replaces the iTrap BASIC and TELEMETRY. The new is much smarter and more adjustable. You can easily upgrade every CLASSIC iTrap with the optinal telemetry sensor to warn you via the TX system if...

**Barb Style connectors**    The new iTrap CLASSIC replaces the iTrap BASIC. The new iTrap is much smarter and more adjustable. - integrated difusser and isolation mounts- M5 porting for standard fuel flow application- a full range of connections to suit both 4mm &...

Includes: Lizard Rudder Servo Support x 1 Set Use for: M138 Lizardcategory-jets,category-jets-brand-sab-avio,category-jets-brand-sab-avio-model-lizard,category-jets-brand-sab-avio-model-lizard-model-lizard