Includes: - Micro KST X12-508 Coreless servo x 1pc Use for: - Goblin 380/420 and other helicopter / airplanes / jets that use micro servos. Specification: Operating Voltage:DＣ4.8V-8.4V Size: 23*12*27.5mm Torque:  4.20Kg.cm@6.0V   5.20Kg.cm@7.4V   6.20Kg.cm@8.4V Speed:  0.09sec/60°@6.0V  0.08sec/60°@7.4V   0.07sec/60°@8.4V Weight: 20g Working Frequence: 1520us/333Hz,  900us-2100us

This is Xpert aluminum 25T clamping servo horn. Clamp design 3.00mm thickness arm The servo horn can be installed either side for different height requirement application. 33.50mm overall length 11/14/17/20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to...

TORQ two heavy duty red plastic servo output arms (horns) that fit all TORQ Micro servos with 5 mm diameter 25 tooth output splines. We think this is most TORQ servos greater than 12 mm thick. Contains two substantial plastic output arms and retaining screws only. The...

Suitable Gyros Spartan DS760、Spartan Quark、Futaba GY611、GY601、GY520、ALIGN GP700、GP750、Mikado V-Bar Tail、CSM SL720、Curtis Youngblood Mini-G 、Solid G、Thunder Tiger TG-7000、BeastX Mircobeast   Torque: 8.2 kg-cm (6.0V) │10.1 kg-cm (7.4V) │11.19 kg-cm (8.2V)  Speed: 0.044 s (6.0V)  │  0.036 s (7.4V) │ 0.032 s (8.2V)  Weight: 73.2 g Dimensions：40 x...

This is Xpert RC B3210 Electronic Switch.Features: Compatible with 6.0V NiMH receiver packs, and 2S LiPo Input voltage 5V ~ 9V Voltage level indication Direct replacement of most OEM switches

        Operation Voltage(rated):DC7.4V      Operation Voltage Range:DC6.0V-8.4V    Torque:    9.8Kg.cm@6.0V                12Kg.cm@7.4V                13.5Kg.cm@8.4V          Speed:     0.10sec/60°@6.0V                0.08sec/60°@7.4V ...

Torque: 18.2 kg-cm (6.0V) │ 22.5 kg-cm  (7.4V) │ 24.9 kg-cm (8.2V) Speed: 0.10 s (6.0V)  │  0079 s (7.4V) │ 0.071 s (8.2V) Weight: 73 g Dimensions：40 x 20 x 38.5 mm   Operating Voltage：6.0 ~ 8.4 V DC Volts  ( 2S Lipo un-regulated )Working frequence：1520μs / 333hzDead band：--------(Default)Bearing...

Features: - Using the newest Hall Sensor Technology- Blistering 0.035 Second Transit Speed- Dedicated Helicopter Rudder Servo- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Newly Design Steel Gear Train for Maximum Strength- Excellent Thermal Dissipation via Finned 6061 Aluminum Case- 8.4V...

TORQ Servo Washers for Xpert/MKS Mini ServosPerfect for getting your servo fit just right, TORQ servo washers for Xpert/MKS Mini Servos are the perfect replacement washers for your Xpert/MKS Mini ServosIncluded: (4) WashersApplication: Xpert/MKS Mini Servos

Features: - Using the newest Hall Sensor Technology- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Fully New Design Steel Gear Train for Maximum Strength- 8.4V High Voltage Ready- Optimized for Heli, Airplane & Jet Aircraft- 6 Ball Bearings Construction Speed: 0.07...

TORQ CL0508 Micro Servo Gear SetTORQ Replacement Gear Set - Because Crashes Happen.A hard crash shouldn't mean the end of your servo. With TORQ servos, fully replaceable gear sets allow you to swap out damaged gears versus replacing the entire servo, saving serious cash...

High voltage, High-Torque, standard size brushless servo600, 700 and even 800 class helicopters swashplateairplanesa great throttle or steering servo on most cars(SANWA SSR compatible) 40*20*38mm  73g Voltage (V) Current (A) Speed (s/60°) Torque (kg*cm) 5.0 2.6 0.108 23 6.0 2.6 0.084 27 7.4 2.6 0.071...

Features: Quick release cable that allows easy and quick installation for all helicopters. Brushless motor design provides extremely high speed, top efficiency, and low power consumption. 4096 resolution and SIC (Single Integrated Circuit) for the highest performance and durability. Aluminum upper and center case....

TORQ BLS1604 Full Size SHV Brushless Tail Servo Features:- Brushless DC Motor Technology for the Ultimate Power & Control- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Fully Replaceable Gear Train for Maximum Strength- Excellent Thermal Dissipation via Finned 6061 Aluminum...

High voltage, High-Torque, Low-Profile brushless servo(The motor is the same as the standard servo)550, 600 and even 700 class helicopters swashplate servoairplanes1/10 Touring Car1/10 Formula Car1/8 Off-road Car1/8 Racing Car 41*20.5*29.5mm  60g Voltage（V） Current（A） Speed (s/60°) Torque (kg*cm) 5.0 3.0 0.108 24 6.0 3.0 0.09...

 Includes 2x metal hubs, 2x metal arms and mounting hardware. Pre-tapped holes @ 18mm and 21mm spacing. 

TORQ BLS2808 Full Size SHV Brushless Cyclic Servo Features:- Brushless DC Motor Technology for the Ultimate Power & Control- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Fully Replaceable Gear Train for Maximum Strength- Excellent Thermal Dissipation via Finned 6061 Aluminum...

TORQ Replacement Gear Set - Because Crashes Happen.A hard crash shouldn't mean the end of your servo. With TORQ servos, fully replaceable gear sets allow you to swap out damaged gears versus replacing the entire servo, saving serious cash when needed the most.Featuring high...

NFC High voltage, High-Speed, MINI brushless servoMain Blade Less than 420mm helicopters tail servo 35*15*31mm 42g  

Operation Voltage(rated): DC7.4V  Operation Voltage Range: DC6.0V-8.4V Torque:   18Kg.cm@6.0V                 22Kg.cm@7.4V                 24Kg.cm@8.4V Speed:     0.09sec/60°@6.0V                 0.08sec/60°@7.4V          ...