Three-layer main frame
Goosky reinforces the center of the airframe with a three-layer frame structure. The stiffer chassis gives the rotor and drivetrain assemblies a rigid foundation for precise control.
Couldn't load pickup availability
The Goosky RS6 Ultra is a 600-class electric RC helicopter kit for experienced pilots building an outdoor flybarless model. Choose the standalone kit with or without rotor blades, or select a 6S or 12S combo with a specified brushless motor, ESC, servos, and rotor blades.
A three-layer main frame and 1:1 flybarless rotor head give the build a rigid foundation for precise cyclic control. The raised tail rotor, carbon-fiber boom, and two-position tail pitch bellcrank are especially relevant if you like to tune how the helicopter responds to tail inputs.
Compare the RS6 Ultra with other Goosky helicopter kits to find the size and build format that suit you.
Choose one of four packages, then select Lime Green or Danxia Orange. Both colors are offered across the standalone kits and the 6S and 12S combos. The package determines which components come in the box.
| Package | What comes with it | Who should consider it |
|---|---|---|
| Kit without Blade | RS6 Ultra airframe kit. Source the rotor blades and electronics separately. | Builders who already have compatible blades or want to choose their own sets. |
| Kit with Blade | RS6 Ultra airframe kit and rotor blades. Source the electronics separately. | Builders who want the blades included and prefer to choose their own motor, ESC, and servos. |
| Combo 1 (6S) | Airframe kit, 6S motor and ESC pairing, servos, and main and tail blades. | Pilots building around 6S who want the power system and rotor components specified together. |
| Combo 2 (12S) | Airframe kit, 12S motor and high-voltage ESC pairing, servos, and main and tail blades. | Pilots building around 12S who want the corresponding motor and high-voltage ESC supplied together. |
Choose the Kit with Blade if you want rotor blades included. Choose the Kit without Blade if you want to supply your own. Both standalone kits leave the electronics up to you. In each photo pair below, Lime Green is on the left and Danxia Orange is on the right.
Airframe shown with the main rotor blades fitted
Airframe shown with the main rotor blades removed
Combo 1 pairs a 1,150 Kv motor with a 150 A ESC for 6S, while Combo 2 pairs a 550 Kv motor with a 180 A high-voltage ESC for 12S. Both supply the same cyclic servos, rudder servo, and blade sizes.
| Component | Combo 1 (6S) | Combo 2 (12S) |
|---|---|---|
| Airframe | 1 × Goosky RS6 Ultra helicopter kit | 1 × Goosky RS6 Ultra helicopter kit |
| Brushless motor | 1 × Goosky 4225-1150KV | 1 × Goosky 4230-550KV |
| Electronic speed control | 1 × Hobbywing Platinum 150A V5.1 ESC | 1 × Hobbywing Platinum HV 180A V5 ESC |
| Cyclic servos | 3 × Goosky DS410MG | 3 × Goosky DS410MG |
| Rudder servo | 1 × Goosky DS320MG | 1 × Goosky DS320MG |
| Main rotor blades | 1 × Goosky 600 mm set | 1 × Goosky 600 mm set |
| Tail rotor blades | 1 × Goosky 95 mm set | 1 × Goosky 95 mm set |
Choose the combo for the cell count you plan to fly, then check pack dimensions, lead and connector clearance, and charger compatibility. The photos below show each combo in both colors.
Combo 1 (6S)
Combo 2 (12S)
The manufacturer gives the airframe dimensions separately from the rotor measurements. For bench or transport clearance, use the main rotor diameter when the blades are installed. For battery selection, use the bay dimensions as a starting point and check that the pack and its leads fit before committing to a battery.
| Specification | Goosky Legend RS6 ULTRA |
|---|---|
| Class and build type | 600-class electric flybarless helicopter kit or combo |
| Airframe dimensions (L × W × H) | 1,212 × 203 × 326 mm |
| Main rotor diameter | 1,352 mm in Goosky's dimension drawing |
| Tail rotor diameter | 260 mm |
| Main and tail blade sizes supplied with combos | 600 mm main / 95 mm tail |
| Flight weight, excluding battery | Approx. 2.88 kg |
| Battery compartment (L × W × H) | 300 × 62 × 56 mm |
| Offered combo power configurations | 6S or 12S |
| Main gear | 116 teeth, 14 mm thick |
| Main gear ratio | 9.66:1 with 12T pinion / 8.92:1 with 13T pinion (standard) |
| Front tail pulley and tail ratio | 75T front pulley, 4.68:1 with 16T |
| Main shaft and feathering shaft | 12 mm / 8 mm diameter |
| Tail spindle and one-piece tail shaft | 5 mm / 6 mm diameter |
| Tail belt width | 7 mm |
| Intended pilot and setting | Experienced kit builder, open outdoor flying field |
Both standalone versions supply the mechanical kit in your chosen color. Use the table below to see which one supplies rotor blades. The 6S and 12S combo table lists the additional supplied components and quantities.
| Included Item | Quantity | Details |
|---|---|---|
| Goosky Legend RS6 ULTRA airframe kit | 1 kit | Included in both standalone versions and in both combos. |
| Rotor blades | — | Included with Kit with Blade. The 600 mm main and 95 mm tail blade specifications in the combo table apply to the two combos. |
Goosky reinforces the center of the airframe with a three-layer frame structure. The stiffer chassis gives the rotor and drivetrain assemblies a rigid foundation for precise control.
The rotor head uses 1:1 control geometry for cyclic resolution and a direct response to inputs. This gives pilots a defined mechanical baseline when setting up the flybarless controller and tuning cyclic feel.
The reinforced 116-tooth main gear is 14 mm thick and designed to handle drivetrain torque loads. Goosky pairs it with a 13-tooth pinion in the standard 8.92:1 configuration.
A self-adjusting tensioner helps maintain consistent tail belt tension during operation. Check belt routing and condition during routine drivetrain inspections.
Goosky positions the tail rotor closer to the main rotor plane to help reduce pitch coupling during pirouettes. A revised guide and idler assembly supports the tail belt under load.
The two-position tail pitch bellcrank gives builders a choice of linkage positions when setting up the tail.
The quick-install blade grip spacers use self-lubricating POM. Goosky designed the spacers for smooth operation and easier assembly and service. That is a practical detail if you expect to remove and refit blades during routine maintenance.
The 300 × 62 × 56 mm bay gives builders room to assess battery fit and placement for the intended 6S or 12S setup. Check lead and connector clearance with the canopy fitted.
The quick-release canopy makes it easier to reach the battery compartment between flights. Removing it also gives you access to check lead routing and carry out routine checks.
Goosky reports that the revised carbon-fiber boom is 30 g lighter and has 38% greater bending strength. The design reduces weight at the tail while retaining the rigidity needed to support the rotor assembly.
If you are moving up from a smaller model, account for the 1,352 mm rotor diameter when you choose a flying site and plan transport. If you are replacing an existing 600-class airframe, inventory the gear you intend to transfer, then check compatibility against the RS6 Ultra specifications.
Browse the RC helicopters range at HeliDirect to compare other sizes and build types.
The RS6 Ultra is best suited to pilots with collective-pitch flying and kit setup experience. Plan time for mechanical assembly, flybarless setup, and radio checks before taking it to an outdoor flying field.
Both are standalone airframe kits. The Kit with Blade includes rotor blades, and the Kit without Blade leaves blade selection to you. Plan to supply the electronics and flight equipment for either standalone package.
Choose Combo 1 for the 6S power system with the 4225-1150KV motor and Hobbywing Platinum 150A V5.1 ESC. Choose Combo 2 for the 12S power system with the 4230-550KV motor and Hobbywing Platinum HV 180A V5 ESC. Both contain the same servos and rotor blades.
The supplied-parts lists for both combos cover the airframe, motor, ESC, four servos, and two rotor blade sets. Plan to provide your own batteries, compatible charger, flybarless controller, and radio system.
Goosky lists the battery compartment at 300 × 62 × 56 mm. Compare the full pack dimensions, including the exit path for the leads and connector, and match the pack configuration to your power system.
Plan to fly this 600-class kit at an open outdoor RC flying field. Its 1,352 mm main rotor diameter calls for substantial clearance from people and obstacles.
Browse Goosky helicopter parts at HeliDirect and match the part number to the RS6 Ultra before placing an order. If you already have parts from a standard RS6, verify the part numbers and stated compatibility first.
HeliDirect's return policy allows eligible new, unused items to be returned within 30 days of receipt, subject to its condition and authorization requirements. Contact the HeliDirect Help Center for a defective item or help starting a warranty request.
Choose Lime Green or Danxia Orange, then choose a standalone kit with or without blades, or pick the 6S or 12S combo that matches your power system.
| Vendor: | Goosky |
| SKU: | BAF230001 |
| Barcode: | BAF230001 |
| Availability: | In Stock |
| Product Type: | Helicopter - Kit/Combo |
| Weight: | 12.92 lb |
Thanks for subscribing!
This email has been registered!