Product: Product: Content view: Package: Instruction: Specification: The high-end MICROBEAST² 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the MICROBEAST² gyro is vibration-reducing improvement and strongly reduce...

Torque:  2.2 kg-cm (6.0V)  /   2.8 kg-cm (7.4V)  /  3.2 kg-cm (8.2V) Speed: 0.07 s (6.0V)  /  0.06 s (7.4V)  /  0.05 s (8.2V) Weight:  19.87 g Dimension：23 x 12 x 27.25 mm   Working  Voltage：3.8V~8.4 V DC Volt ( 2S Lipo un-regulated ) Working  frequency：1520μs / 333hzDead Band：0.001 ms (Default)Bearing：Dual Ball Bearings Motor：Coreless MotorGear：Chrome-Titanium alloy gear...

  Torque:  1.8 kg-cm (6.0V)  /   2.3 kg-cm (7.4V)  /  2.6 kg-cm (8.2V) Speed: 0.043 s (6.0V)  /  0.035 s (7.4V)  /  0.031 s (8.2V) Weight:  19.87 g Dimension：23 x 12 x 27.25 mm   Working  Voltage：3.8V~8.4 V DC Volt ( 2S Lipo un-regulated ) Working  frequency：760μs / 560hzDead Band：0.001 ms (Default)Bearing：Dual Ball Bearings Motor：Coreless MotorGear：Chrome-Titanium alloy gear 450,...

RotorFlight Website (for Configurator and Tutorial): https://www.rotorflight.org/ About: The FLYDRAGONpro gyroscope uses the open source Rotorflight firmware, which is based on Betaflight 4.5 and enjoys all the power of the Betaflight platform, as well as many new features added to the helicopter, Rotorflight also...

Spirit W3 is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit W3 consists from Spirit 3 hardware and Spirit Wave receiver. Manual available...

RotorFlight Website (for Configurator and Tutorial): https://www.rotorflight.org/ About: The FLYDRAGONpro gyroscope uses the open source Rotorflight firmware, which is based on Betaflight 4.5 and enjoys all the power of the Betaflight platform, as well as many new features added to the helicopter, Rotorflight also...

Everything you ever wanted in a micro servo! Presenting you the new, revised, and innovative X12-708 Micro DC brushless servo. It’s now possible to program and tune a micro servo to your liking. The new design provides a strong, faster, and more efficient servo....

Description: The H1 Pro is the next evolution of the well proven H1 Heli flight controller with next generation sensors, anti-interference CAN GPS Bus. It supports new features like Wireless Calibration, Assisted Co-ordinated turn, three flight sensitivies and soft take-off/landing which can be selectively...

Specifications: Working Frequency: 1520us/333Hz Operating voltage range: 4.8V – 8.4V Motor: Coreless Dimensions: 23mm (32mm) x 12mm x 27.3mm Motor type: Coreless motor 12mm Horn gear spline: 25T ⌀ 4.9mm Wire diameter: 0.15mm2 Number of wire cores: 30 Weight: 21g ± 1g Speed: 0.052sec/60...

Description: We(XDFly) have released HPRO 35A ESC 3-6S Built-in SBEC 6-12V Adjustable Speed Control For RC Airplane Aircraft 250-300Helicopter. Key Features: 1. Equipped with high-performance 32-bit G4 processor with operating frequency of up to 170MHz.2. Adopting new generation of power MOSFET, it features low...

GDW-G20 GDW G20 10KG High Torque High Speed Metal HV Digital Brushless Micro Servo Compatible with 250 to 420 size 3D helis   Features:   Race-class helicopter steering gear Helicopter high-speed digital steering gear Stainless steel output teeth, double bearings Tough and wear-resistant Quick response,...

GOOSKY F701-ELRS Flybarless Controller is specifically optimized and designed for Rotorflight firmware, offering low-latency response and stable attitude control tailored for RC helicopter flight characteristics. An onboard ExpressLRS (ELRS) receiver is integrated via UART1. No external receiver is required, reducing wiring complexity and enabling...

GOOSKY F701-ELRS Flybarless Controller is specifically optimized and designed for Rotorflight firmware, offering low-latency response and stable attitude control tailored for RC helicopter flight characteristics. An onboard ExpressLRS (ELRS) receiver is integrated via UART1. No external receiver is required, reducing wiring complexity and enabling...

Description: The specified current is the maximum continuous full power current with adequate cooling. - 2 to 4s LiPo, with under voltage protection by power reduction. - 6 to 12 cells NiMH, with under voltage protection by power reduction. - disconnectable under voltage detection....

Spirit RS is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit RS consists from Spirit 2 hardware and JETI...

This high end micro servo offers incredible speed and good torque, it is also 100% high voltage compatible and very precise. Ideal for helicopters and airplanes requiring micro servos with high speed. High Voltage High Speed Excellent Centering Compatible with Futaba type horns/arms Light...

The SV12-12 Super High Voltage (SHV) micro servo is designed for demanding applications, making it ideal for RC helicopters, robotics, and other high-performance scenarios. Its standout features include support for 3S LiPo direct drive and high-voltage operation from 8.4V to 12V, delivering a powerful torque of...

*** PACKAGE INCLUDES: 1* RadioMaster TX16S MK3 MAX Radio Controller (ELRS / M2 / 512MB) - Gold 1* RadioMaster Nexus-XR Helicopter Flight Controller Integrated 2.4GHz ExpressLRS Receiver - Grey 1* Pulse 6000mAh Transmitter 2S 7.4V LiPo Battery For RadioMaster Boxer and TX16s 1. RadioMaster...

*** PACKAGE INCLUDES: 1* RadioMaster TX16S MK3 MAX Radio Controller (ELRS / M2 / 512MB) - Gold 1* RadioMaster Nexus-XR Helicopter Flight Controller Integrated 2.4GHz ExpressLRS Receiver - Red 1* Pulse 6000mAh Transmitter 2S 7.4V LiPo Battery For RadioMaster Boxer and TX16S 1. RadioMaster...