NOTE:    IKON2 works with SPM4651T.  You will need to buy an SPMA3066 adapter to connect to the IKON2. (required also for RX firmware updates and to activate the warranty by registering the receiver on the My Spektrum website). If you want to make an adaptor...

DS215MG HV servo is an amazingly powerful and fast metal cased high voltage servo designed to be run directly from a 2S LiPo without needing a regulator. With 3.7 kg.cm of torque and a rotational velocity of 0.05 sec/60° it combines exceptional power with...

User Manual > Manual_Platinum-80A-V5.pdf Product Catalog >  Platinum  80A V5 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...

Mini iKON 2 Flybarless System - The Legend Continues.The flybarless unit is the heart and soul of the beast at play - a singular device that will effect and influence every nuance of flight. When it comes to choosing the flybarless controller for your needs,...

This servo is basically a Mini Rudder Servo that can handle up to 700-800 Heli size, but if you have FBL that can use with 760us cyclic servo, you can also use this servo as cyclic servo for 550-600 size. Features:- Brushless Motor Technology...

Torq BLS0808 Brushless Micro HV Cyclic Servo - Power, Performance & Pure Domination. Optimized for second to none power & performance, TORQ brings forth a BRUSHLESS micro servo that is ready & able to push the boundaries of the micro servo world.Designed specifically for high...

Outstanding ARM M7 processor M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features. This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need. It packs native telemetry support...

The Nexus-XR revolutionizes helicopter flight controllers by integrating a cutting-edge ExpressLRS receiver with dual Semtech SX1281 2.4GHz transceivers. This built-in receiver delivers exceptional RF performance, superior range, reliability, and effortless setup. It eliminates the need for external receivers, simplifying installation and reducing weight.  At...

The Nexus-XR revolutionizes helicopter flight controllers by integrating a cutting-edge ExpressLRS receiver with dual Semtech SX1281 2.4GHz transceivers. This built-in receiver delivers exceptional RF performance, superior range, reliability, and effortless setup. It eliminates the need for external receivers, simplifying installation and reducing weight.  At...

Includes: - Micro KST X12-508 Coreless servo x 1pc Use for: - Goblin 380/420 and other helicopter / airplanes / jets that use micro servos. Specification: Operating Voltage:DＣ4.8V-8.4V Size: 23*12*27.5mm Torque:  4.20Kg.cm@6.0V   5.20Kg.cm@7.4V   6.20Kg.cm@8.4V Speed:  0.09sec/60°@6.0V  0.08sec/60°@7.4V   0.07sec/60°@8.4V Weight: 20g Working Frequence: 1520us/333Hz,  900us-2100us

Description: We(XDFly) have released HPRO 85A ESC 3-6S Built-in SBEC 6-12V Adjustable Speed Control For RC Airplane Aircraft F3A F3C 380-420 Helicopter. Key Features: Equipped with high-performance 32-bit G4 processor with operating frequency of up to 170MHz.2. Adopting new generation of power MOSFET, it...

Instruction: Specification: ●For T-REX 450L 3S, must use with 450L Main Shaft Bearing Block (H45B013XXW)●Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.●High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.●Aluminum...

Outstading ARM M7 processor M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features. This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need. It packs native telemetry support...

Instruction: Specification: ●Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.●High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.●Supports...

Instruction: Specification: ●For T-REX 450L 3S, must use with 450L Main Shaft Bearing Block (H45B013XXW)●Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision.●High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics.●Aluminum...

Product Details Smart ESC Ready Heli Pilots will be able to easily monitor Voltage, Current, Rotor head RPM and more when combined with a Spektrum Smart ESC. No extra modules, wires or connections required. All this data will automatically be displayed on a compatible...

Description: We(XDFly) have released HPRO 65A ESC 3-6S Built-in SBEC 6-12V Adjustable Speed Control For RC Airplane Aircraft F3A F3C 325-380 Helicopter. Key Features: 1. Equipped with high-performance 32-bit G4 processor with operating frequency of up to 170MHz.2. Adopting new generation of power MOSFET,...

NFC High voltage, High-Speed, MINI brushless servoMain Blade Less than 420mm helicopters tail servo 35*15*31mm 42g  

The Nexus-X Helicopter Flight Controller is specifically designed for Rotorflight 2.2 and provides outstanding compatibility, performance, and ease of use.  Powered by the STM32F722 MCU and equipped with the highly accurate ICM42688P 6-axis MEMS motion tracker, the Nexus-X provides precise control, seamless stabilization, and...

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (5.0/6.0/7.4 V) with a continuous current of 5A and a maximum of 15A. The voltage specifications allow the use...