This product is for Platinum V4 and V4.1 Series Manual

User Manual > Manual_Platinum-80A-V5.pdf Product Catalog >  Platinum  80A V5 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...

  Manual Download Overview This multifunction program box is for programming HOBBYWING brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable...

User Manual > Manual_Platinum-150A-V5.1.pdf Product Catalog >  Platinum  150A V5.1 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...

Specifications Firmware upgrade and programming via OTA Programmer or LCD program box  (purchase separately) Download Users_manual_Platinum 180A-V5.pdf

Specification Continuous/Peak current 260A / 400A Input voltage 6-14S LiPo battery BEC Switch Mode BEC; output voltage 5-12V adjustable (adjusted 0.1V); output current cont. 10A, Peak 30A Input/Output wires 1 x black and 1x red 8AWG silicone wires / 3 x black 10AWG silicone...

The RPM sensor is an accessory of the high voltage speed controller. Function It detects the voltage changes at the wires of brushless motor, and then outputs the RPM signal. This RPM sensor can work with some speed control systems for helicopters. And one...

User Manual > Manual_Platinum-120A-V5.pdf Product Catalog >  Platinum  120A V5 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...

Over-The-Air Programming Device fits in your pocket  OTA Programmer is a module which adopted the Bluetooth communication technology for transferring data between an ESC and a smart device (Android phone, tablet, and etc). It makes the wireless communication between ESC and smart device possible;...

Overview This adapter is suitable for Platinum V4/4.1/ 5 series or later with data backhaul function. The electronic governor is connected to the Futaba receiver that supports the S.BUS2 protocol, enabling the ESC to transmit Telemetry data to the Futaba Radio in real-time displaying...

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (5.0/6.0/7.4 V) with a continuous current of 5A and a maximum of 15A. The voltage specifications allow the use...

The 3A-UBEC is a switch mode DC/DC regulator, it outputs a consistent safe voltage for the receiver, gyro and servos. It is very suitable for RC helicopter and other RC models especially when the built-in BEC in the speed controller has a very limited output capability....

Download Manual Feartures ESC which features a high performance 32-bit ARM M4 microprocessor (with a running frequency of up to 120MHz) is compatible with various brushless motors. DEO (Driving Efficiency Optimization) Technology greatly improves throttle response & driving efficiency and reduces ESC temperature. Separate...

Specifications: PN  30606000 Linear Mode/Switch ModeHigh Voltage/Regular Switch modeHV Cont./Peak Current 25A/50A Input Voltage (of the Main Power Supply) 3S~18S LiPo (9V~80V) Input Voltage (of the Backup Power Supply) 1S~2S LiPo (/3-9V) Output Voltage 5.2V/6.0V/7.4V/8.4V Adjustable Input Wires Main Power Supply: Red-16AWG-270mm*1/Black-16AWG-270mm*1 Output Wires...

Overview The UBEC uses an efficient DC-DC regulator chip with a conversion efficiency of more than 90%. UBEC output voltage is adjustable in three stages (6.0/7.4/8.4 V) with a continuous current of 10A and a maximum of 25A. The voltage specifications allow the use...

Overview The RPM & Telemetry Signal Coupler Module, or SCM for short, solves the issues like “RPM signal from ESC cannot be correctly recognized by flybarless device”, “the GND level of Telemetry signal from ESC doesn't match the GND level of flybarless device” and...

Download Manual