SAB was the first to introduce the Goblin 420 with a Direct Drive motor, opening up new possibilities in this class. Later, to maximize the power-to-weight ratio, SAB developed the belt-driven version: lighter, more powerful, and even more extreme.
Now, SAB raises the bar once again by combining technology and design. Inspired by the iconic lines of the best-selling SG760, the new ilGOBLIN 420 brings the same stunning appeal to the 420 class.
Includes: - Futuba Gear Type Micro Cyclic Servo Arm 5mm spline 21T (big hole) x 3pcs - Futuba Gear Type Micro Cyclic Servo Arm 5mm spline 21T (small hole) x 3pcs - Futuba Gear Type Midi Tail Servo Arm 6mm spline 25T x 1pc...
u00a05 x Uniball M3 u00d85 H3.5 (5pcs)
u00a05 x UNIBALL SPACER
u00a05 x Socket Head Capu00a0 M2x8
u00a05 x Socket Head Cap M2x6
category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick-options-tail-parts
Includes:
- Plastic Tail Linkage x 2pcs
- Grip Link Bushing x 2pcs
- Socket Head Cap M2x6 x 2pcs
Use for:
- Goblin 380 / 500 / 570 / 630 / 700
category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick-options-tail-parts
Includes:
- Plastic ESC case x 1set
- Male Connector x 2pcs
- Finishing Washer M2.5 x 2pcs
- Socket Head Cap Screw M2x6mm x 1pc
- Socket Head Cap Screw M2.5x20mm x 2pcs
Use for:
- RAW500
NOTE: IKON2 works with SPM4651T. You will need to buy an SPMA3066 adapter to connect to the IKON2. (required also for RX firmware updates and to activate the warranty by registering the receiver on the My Spektrum website). If you want to make an adaptor...
TORQ CL0508 Micro HV Servo - Power, Performance & Pure Domination. Optimized for second to none power & performance, TORQ brings forth a micro servo that is ready & able to push the boundaries of the micro servo world.Designed specifically for high torque / high...
TORQ CL0604T Mini HV Rudder Helicopter Servo - Unworldly Precision & Control.Explore new worlds of precision & control with the TORQ CL0604T Mini HV Rudder Helicopter Servo. Specifically designed for the intense demand of helicopter rudder control, the TORQ CL0604T Mini HV Rudder Helicopter...
DS215MG HV servo is an amazingly powerful and fast metal cased high voltage servo designed to be run directly from a 2S LiPo without needing a regulator. With 3.7 kg.cm of torque and a rotational velocity of 0.05 sec/60° it combines exceptional power with...
User Manual > Manual_Platinum-80A-V5.pdf Product Catalog > Platinum 80A V5 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...
This servo is basically a Mini Rudder Servo that can handle up to 700-800 Heli size, but if you have FBL that can use with 760us cyclic servo, you can also use this servo as cyclic servo for 550-600 size. Features:- Brushless Motor Technology...
KST DS565X Mini Size Digital Servo is a great choice for helicopters ranging from 325mm-425mm rotor blade size requiring mini servos on the tail rotor! It's critical to ensure your gyro has the capability to operate 760uS Tail Servos, ensuring that the KST 565X...
Torq BLS0808 Brushless Micro HV Cyclic Servo - Power, Performance & Pure Domination. Optimized for second to none power & performance, TORQ brings forth a BRUSHLESS micro servo that is ready & able to push the boundaries of the micro servo world.Designed specifically for high...
Outstanding ARM M7 processor M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features. This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need. It packs native telemetry support...
GET THE PRO VERSION Since the first release, CORTEX combines a demonic and a happy-go-lucky flying enjoyment for the ambitioned RC pilot. High-quality, reliable, versatile, universally ready for operation – that’s what this extra class in 3-axis stabilization systems is known for a long...
The Nexus-XR revolutionizes helicopter flight controllers by integrating a cutting-edge ExpressLRS receiver with dual Semtech SX1281 2.4GHz transceivers. This built-in receiver delivers exceptional RF performance, superior range, reliability, and effortless setup. It eliminates the need for external receivers, simplifying installation and reducing weight. At...
I got this looking to upgrade from my aging Goosky RS4 which was previously the most-flow heli in my fleet over the last 18 months or so. This SAB 420 looks, feels, and flies very much like my Goblin 520 pro which I LOVE. Huge upgrade over the flight characteristics of the RS4 in my opinion. So now I can have the amazing looks and rock-solid feel of my 520 but in the smaller 420 size which is easier to transport, smaller/cheaper batteries & parts, etc. Its true that SAB's are x2 the price of the other brand heli's but man are they sweet!
E
Eddie
SAB ILGoblin PRO 420 Helicopter Kit - With Main & Tail Blades - Yellow
I have bought all of my larger (420 and up) Heli's from HeliDirect and they have not disappointed me at all. Great stock availability.
C
Chris B.
SAB ILGoblin PRO 420
This is a quality kit. Everything from the packaging to the instruction manual was top notch. Parts are bagged according to the page number in the manual. The kit went together with no issues.
A
Andrew S.
Pricey But Amazing
This kit went together very well. Even a beginner could build one of these. Everything about this design and build seemed deliberate and had a lot of thought put into it. The colors, the design of the canopy, the motor mount, the battery tray, the tail boom, everything has its place and it works great.
I was having a hard time tuning out the tail wobbles (Radiomaster Nexus FBL w/ Rotorflight) until I realized I had the BEC voltage at 5V instead of 8.4V. After I fixed that it cleaned right up and was rock solid. I guess they designed the airframe around HV servos so make sure yours are fast enough. I'm running the stock blades and it seems to like higher rpms due to their smaller chord length.
If you are between this and the OMPHOBBY M4 Max, get the SAB it is better in every way. The M4 Max is actually about 100 grams lighter but it flies like a stretched 380 not a true 420 size. The M4 Max is more squirrelly and easier to crash than the iLGoblin 420 even though they are almost the same size. Yes parts are cheaper for M4 but since you will crash more often it will become more expensive in the long run. The iLGoblin is a little slower and ironically slightly less good at low rpm flying but overall more predictable in flight. Therefore it's easier to practice maneuvers on and more forgiving if you get out of shape.
C
Chris
SAB IL Goblin Pro 420
Easy to follow instruction manual.I like how most of the parts are grouped together
by the page number labeled on the ziplock bags.
Z
Zachary C.
Amazing Kit
Very well designed and the color and design just pop. The 420 sized kits are easy to transport and fly about anywhere. Does not disappoint.
D
Daniel S.
I’m goblin pro 420 is the Best of the best !!
I am really happy with my purchase worth every penny!! And like. Always heli direct best service and fast shipping!!