SAB introduced the Direct Drive on this class of helicopter and as you may know, we sold more than 2500 KITS.
However, in pursuit of improving performance, we determined that the Direct Drive could no longer be the correct solution. The evolution of the RAW 420 will use a motor belt drive.
This is how the RAW 420 Competition was born. Lighter, faster, more flexible in the selection of the desired head speed at a higher performance level.
u00a05 x Uniball M3 u00d85 H3.5 (5pcs)
u00a05 x UNIBALL SPACER
u00a05 x Socket Head Capu00a0 M2x8
u00a05 x Socket Head Cap M2x6
category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick-options-tail-parts
Includes:
- Plastic Tail Linkage x 2pcs
- Grip Link Bushing x 2pcs
- Socket Head Cap M2x6 x 2pcs
Use for:
- Goblin 380 / 500 / 570 / 630 / 700
category-helicopter,category-helicopter-brand-sab-heli-division,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick,category-helicopter-brand-sab-heli-division-model-urk-genesis-maverick-options-tail-parts
Includes:
- Plastic ESC case x 1set
- Male Connector x 2pcs
- Finishing Washer M2.5 x 2pcs
- Socket Head Cap Screw M2x6mm x 1pc
- Socket Head Cap Screw M2.5x20mm x 2pcs
Use for:
- RAW500
Includes:
- G10 battery tray x 1pc
- SAB double side tape x 1pc
- Battery strap x 1pc
- SAB Battery connector x 1set
Used for:
- Goblin RAW 420 Competition
NOTE: IKON2 works with SPM4651T. You will need to buy an SPMA3066 adapter to connect to the IKON2. (required also for RX firmware updates and to activate the warranty by registering the receiver on the My Spektrum website). If you want to make an adaptor...
TORQ CL0508 Micro HV Servo - Power, Performance & Pure Domination. Optimized for second to none power & performance, TORQ brings forth a micro servo that is ready & able to push the boundaries of the micro servo world.Designed specifically for high torque / high...
TORQ CL0604T Mini HV Rudder Helicopter Servo - Unworldly Precision & Control.Explore new worlds of precision & control with the TORQ CL0604T Mini HV Rudder Helicopter Servo. Specifically designed for the intense demand of helicopter rudder control, the TORQ CL0604T Mini HV Rudder Helicopter...
DS215MG HV servo is an amazingly powerful and fast metal cased high voltage servo designed to be run directly from a 2S LiPo without needing a regulator. With 3.7 kg.cm of torque and a rotational velocity of 0.05 sec/60° it combines exceptional power with...
User Manual > Manual_Platinum-80A-V5.pdf Product Catalog > Platinum 80A V5 leafiets EN.pdf Overview: Synchronous Rectification Technology with multiple advantages The Platinum V5 Series features a new double-sided heat sink with additional "side windows" for better cooling. Multiple protections, Extra Safety: It has multiple protection functions, to...
This servo is basically a Mini Rudder Servo that can handle up to 700-800 Heli size, but if you have FBL that can use with 760us cyclic servo, you can also use this servo as cyclic servo for 550-600 size. Features:- Brushless Motor Technology...
KST DS565X Mini Size Digital Servo is a great choice for helicopters ranging from 325mm-425mm rotor blade size requiring mini servos on the tail rotor! It's critical to ensure your gyro has the capability to operate 760uS Tail Servos, ensuring that the KST 565X...
Torq BLS0808 Brushless Micro HV Cyclic Servo - Power, Performance & Pure Domination. Optimized for second to none power & performance, TORQ brings forth a BRUSHLESS micro servo that is ready & able to push the boundaries of the micro servo world.Designed specifically for high...
Outstanding ARM M7 processor M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features. This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need. It packs native telemetry support...
Specification: Motor shaft diameter:5mm Motor shaft length:21mm Stator Diameter:32mm Stator Thickness:20mn No. of Stator Arms:8mm Number of slots/poles: 10N/10P Motor Wind: 5+3 Turn Delta Motor wire diameter:0.86mm Motor Kv: 1000Kv Outside Diameter: 40.8 mm Shaft Diameter: 5 mm Body Length: 54.5 mm Overall Shaft...
The Nexus-XR revolutionizes helicopter flight controllers by integrating a cutting-edge ExpressLRS receiver with dual Semtech SX1281 2.4GHz transceivers. This built-in receiver delivers exceptional RF performance, superior range, reliability, and effortless setup. It eliminates the need for external receivers, simplifying installation and reducing weight. At...
I wanted this newer version and like the color so I got one.
I have an older yellow SAB 420 raw and I love how it feels in the air while flying it so I decided to get this newer bright orange colored version. It went together very well and high quality parts. It is a niced sized heli to carry around to get flights in when you can and batteries of 6 cell 2200-2800 sized aren't very expensive so keep some handy and go have a ball. It's very smooth but agile. I think I will be getting the 700 sized raw yellow one soon. Oh yeah it's quieter than other helis because it's belt driven from the motor to the main gear.
B
Brian S.
Raw 420 Competition
This helicopter is quick and easy to build. It comes with a manual that is easy to follow and all of the pieces fit together like they should.
Z
Zachary C.
Capable and Smooth
This was my first ever helicopter build. It was easy to assemble and had no issues. A month of flying and I cannot wait to build another one. This helicopter is quiet being belt driven compared to anything else I have flown at this point and is very agile. This can do anything you throw at it and will not quit. Very well designed and you will not be disappointed, I would definitely recommend getting one.
B
Bill G.
I buy lots of products here but, Didn’t buy mine here, the other site doesn’t let you review…BK😉😂
Like I said I didn’t buy mine here but I do buy lots from Heli direct. This Heli is great, buy one here or wherever you want. It flys great, I try and put 2 packs a day into it. It’s my practice Heli. Now I think I want the mini genesis to complement it.
D
Diego M.
Easy build
Amazing little heli. Looks just the bigger raw line up. Easy to see and will do anything you throw at it.
J
James
Sab 420 competition
Building is a breeze! Super happy! I have 8 different 400 size helis and this one builds about the easiest. Makes it super nice with colored life like instructions. It's definitely worth it! Not cheap but worth it
M
Marc A.
My fourth Raw 420
This is my fourth Raw 420 and my second 420 competition. The 420's are my go-to helicopters. They fly great and reliable. Easy to assemble and excellent instructions. The prioritary battery connecter on the competition is a much heavier duty than used in the direct drive Raw. I would recommend using the Torq BLS0808 Brushless Micro HV Cyclic Servo's and TORQ BLS0705M Mini HV Brushless servo for the tail.
S
Syed Z.
Excellent
First SAB build and it has gone well. Quality kit and packaging. I like having the physical build manual and think it is laid out well. Very happy overall.
J
JS
Awesome little bird !!
Love it, flies so smooth and bigger then it is.
A
Andy S.
Awesome selection
They have anything helicopter related, the selection of kits can be overwhelming