SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
Electronics
Electronics

SAB GENESIS F3C Helicopter Kit w/ Blades

Vendor: SAB Heli Division
|
SKU: SG767
Availability: Back-Order
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Price Match Guarantee
$1,900.80
$1,900.80
ETA: End Of July
The order quantity exceeds the stock!
SAB GENESIS F3C Helicopter Kit w/ Blades

SAB GENESIS F3C Helicopter Kit w/ Blades

$1,900.80
ETA: End Of July
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades
SAB GENESIS F3C Helicopter Kit w/ Blades

SAB GENESIS F3C Helicopter Kit w/ Blades

$1,900.80

Related Products

Description



TECHNICAL OVERVIEW

Main Rotor

  •     Main shaft: 12 mm – Tail shaft: 6 mm – Spindle: 10 mm – Bearings: 10x19x5 mm
  •     Pivot-mounted spindle allows fine-tuning of head stiffness and optimized control authority
  •     One-way bearing directly integrated on the main shaft axis

Tail Rotor

  •     Tail shaft and hub machined from a single solid piece for maximum precision and strength
  •     Tail pulley available in three different sizes to fine-tune the tail ratio according to pilot preference

Tail Boom

  •     Adjustable stiffness via interchangeable rubber dampers with variable shore hardness
  •     Internal carbon rod for added rigidity and clean aesthetics
  •     Built using high-pressure molding technology
  •     Total weight: only 220 grams
  •     Made of molded carbon for the perfect balance of strength and lightness

Canopy

  •     Unique rear-entry canopy design allows easy and quick battery installation from the back



SPECIFICATIONS

  • Airframe weight : 3980 g excluding battery,  (4525 motor, 150A ESC, servos, FBL)
  • Main rotor diameter : 1576 mm (with 737 mm blades)
  • Main blades length : 690–750 mm
  • Tail rotor diameter : 292 mm (with 110 mm tail blades)
  • Tail blades length : 105–115 mm
  • Cyclic servos : Standard size (40 mm)
  • Tail servo : Standard size (40 mm)
  • Main rotor gear ratio : 6.1 to 8.4 : 1 (21T pulley included = 7.3 : 1)
  • Tail rotor gear ratio : 4.1 to 5.0 : 1 (24T pulley included = 4.4 : 1)
  • Power system : Supports 12S setups
  • Motor KV range : 340–420 KV
  • Battery compartment dimensions : 50 x 60 x 300 mm

 

 

KEY FEATURES

 

Forged Carbon Main Frame

Constructed from Forged Carbon, it combines extremely low weight with superior structural rigidity, ensuring excellent responsiveness and in-flight stability.


Single Stage Transmission System

The drive system uses a Gates GT3 toothed belt, offering smooth performance and exceptional quietness, contributing to the overall acoustic cleanliness of the model.


Dampening Tail Boom Support System

The tail boom is supported by variable-hardness rubber dampers, an innovative solution that effectively cancels out the typical vertical oscillations seen in models operating at low rotor RPMs.


New Cyclic Servo Layout

With the new servo layout, the 3 servo linkages are equal and maximize the precision of 3 cyclic servos


Unique Tail Servo Mounting Position

Tail servo located inside the tail boom allows the carbon tail push rod become “invisible” inside the tail boom as well.


New Design S737 F3C Main Blades

Equipped with the latest F3C blades developed in collaboration with World Champion Ennio Graber.


One Way Bearing On the Main Shaft

The one way hub is assembled on the main pulley and work with the main shaft through a steel bushing.


Quick Connectors And Battery Release

The battery tray features integrated connectors for quick, secure, and tidy connections. The battery is inserted from the rear without removing the canopy.


F3C-HPS Head System With 35mm Blades Grip Arms

Refined through hundreds of test flights, the rotor head geometry ensures maximum precision, progressive control response, and predictable handling.


New Tail Pitch Leverler Design

The carbon rod is positioned inside the tail boom, giving it a clean, aerodynamic look.

 

PACKAGE INCLUDES

  •     Genesis F3C - SG767 Helicopter kit with:
  •     21T motor pulley (other sizes available separately)
  •     2 battery trays with integrated connectors
  •     S737X F3C main blades (240 g)
  •     S110 tail blades (110 mm)

 

 

Read More
Additional Information
Vendor: SAB Heli Division
SKU: SG767
Barcode: 8935254823162
Availability: Out Of Stock
Product Type: Helicopter - Kit/Combo
Weight: 36.0 lb
Electronics
  • MKS HBL880 0.032 sec/60 (11.19kg.cm 8.2V) - 8mm Output Shaft. - HeliDirect

    MKS HBL880 0.032 sec/60 (11.19kg.cm 8.2V) - 8mm Output Shaft.

    SKU : MKS-HBL880
    Suitable Gyros Spartan DS760、Spartan Quark、Futaba GY611、GY601、GY520、ALIGN GP700、GP750、Mikado V-Bar Tail、CSM SL720、Curtis Youngblood Mini-G 、Solid G、Thunder Tiger TG-7000、BeastX Mircobeast   Torque: 8.2 kg-cm (6.0V) │10.1 kg-cm (7.4V) │11.19 kg-cm (8.2V)  Speed: 0.044 s (6.0V)  │  0.036 s (7.4V) │ 0.032 s (8.2V)  Weight: 73.2 g Dimensions：40 x...
    $230.99
    $230.99
  • MKS HBL850 (0.071s/60- 24.9kg.cm@8.2v) - 8mm Output Shaft. - HeliDirect

    MKS HBL850 (0.071s/60- 24.9kg.cm@8.2v) - 8mm Output Shaft.

    SKU : MKS-HBL850
    Torque: 18.2 kg-cm (6.0V) │ 22.5 kg-cm  (7.4V) │ 24.9 kg-cm (8.2V) Speed: 0.10 s (6.0V)  │  0079 s (7.4V) │ 0.071 s (8.2V) Weight: 73 g Dimensions：40 x 20 x 38.5 mm   Operating Voltage：6.0 ~ 8.4 V DC Volts  ( 2S Lipo un-regulated )Working frequence：1520μs / 333hzDead band：--------(Default)Bearing...
    $219.99
    $219.99
  • Xnova Lightening Outrunner Motor 4525 - 530KV For RC Helicopter Shaft A - HeliDirect

    Xnova Lightning Outrunner Motor 4525 - 530KV For RC Helicopter Shaft A

    SKU : XN4525530L-A
    Xnova 4525-530kv We have spent hours of testing to improve the very well established 4525 series. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over...
    $479.99
    $479.99
  • Xnova Lightening Outrunner Motor 4525 - 560KV For RC Helicopter Shaft A - HeliDirect

    Xnova Lightning Outrunner Motor 4525 - 560KV For RC Helicopter Shaft A

    SKU : XN4525560L-A
    Xnova 4525-560kv We have spent hours of testing to improve the very well established 4525 series. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over...
    $479.99
    $479.99
  • Xnova Lightening Outrunner Motor 4530 - 525KV For RC Helicopter Shaft A - HeliDirect

    Xnova Lightning Outrunner Motor 4530 - 525KV For RC Helicopter Shaft A

    SKU : XN4530525L-A
    Xnova 4530-525kv We have spent hours of testing to improve the very well established 4530 series. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over...
    $549.99
    $549.99
  • KST BLS805X 7.5KG Torque Metal Gear Servo For 550-700 Class Helicopter Tail - HeliDirectKST BLS805X 7.5KG Torque Metal Gear Servo For 550-700 Class Helicopter Tail - HeliDirect

    KST BLS805X 7.5KG Torque Metal Gear Servo For 550-700 Class Helicopter Tail

    SKU : BLS805X
    Description: Operating Speed: 0.048sec/60°@6.0VOperating Speed: 0.042sec/60°@7.4VOperating Speed: 0.039sec/60°@8.4VStall Torque: 7.5Kg.cm@8.4VStall Torque: 6.5Kg.cm@7.4V Stall Torque: 5.5Kg.cm@6.0VDimensions: 40.5*20*37mmOperating Voltage: 6.0V-8.4VOperating signal: 760us / 560HzMotor type: BrushlessBall Bearing: 2BBWeight: 70gUsage: for 550-700 Class Helicopter Tail Features: High quality brushless motorsHigh strength 2BB ball bearingsStandard rudder servo armMetal steering gear, long service lifeGood performance digital servos Package Included: 1 x KST BLS805X 7.5KG...
    $79.99
    $79.99
  • BavarianDEMON Axon - HeliDirectBavarianDEMON Axon - HeliDirect
    Out Of Stock

    BavarianDEMON Axon

    SKU : BD-AXON
    Especially developed for all kind of RC helicopter, the AXON combines all State-of-the-Art features, without leaving a simple handling behind – primarily including the soon available Android- & iOS-Apps via Bluetooth. As one of the most important details when out at the flying field...
    $420.00
    $420.00
    Out Of Stock
  • Xpert AS-8601-HV A1 Standard Size Aluminum Servo - HeliDirect

    Xpert AS-8601-HV A1 Standard Size Aluminum Servo

    SKU : AS-8601-HV
    The AS-8601-HV A1 has aluminum top case with plastic bottom support. The well known Xpert level of precise centering and durability makes A1 the optimum servo option in the market in 2016. ------------------------------------------------------------------- Torque - @8.4V: 530.22 oz-in - @7.4V: 467.06 oz-in - @6.0V:...
    $119.99
    $119.99
  • Xnova XTAREQ 700 Class Motor Shaft AXnova XTAREQ 700 Class Motor Shaft A

    Xnova XTAREQ 700 Class Motor Shaft A

    SKU : XTAREQ550KV
    XTAREQ 700 class high-end motor Tareq Alsaadi, legend and a mentor in the RC helicopter scene. For years we have worked with him for the idea to develope the most unique, powerful and strongest motor ever. A motor which have absolute no room left...
    $604.99
    $604.99
  • iKON 2 Flybarless System w/o Bluetooth - HeliDirect

    iKON 2 Flybarless System w/o Bluetooth (Micro USB Cable Not Included)

    SKU : iKON2001
    NOTE:    IKON2 works with SPM4651T.  You will need to buy an SPMA3066 adapter to connect to the IKON2. (required also for RX firmware updates and to activate the warranty by registering the receiver on the My Spektrum website). If you want to make an adaptor...
    $198.99
    $198.99
  • iKON 2 HD Flybarless System - HeliDirectiKON 2 HD Flybarless System - HeliDirect

    iKON 2 HD Flybarless System

    SKU : iKON2003
    NOTE:    IKON2 works with SPM4651T.  You will need to buy an SPMA3066 adapter to connect to the IKON2. (required also for RX firmware updates and to activate the warranty by registering the receiver on the My Spektrum website). If you want to make an adaptor by...
    $230.99
    $230.99
  • Xnova XTS 4525-560KV YY Brushless Motor Thick Wire - Shaft A - HeliDirectXnova XTS 4525-560KV Brushless Motor with Thick Wires - Shaft A - HeliDirect

    Xnova XTS 4525-560KV YY Brushless Motor Thick Wire - Shaft A

    SKU : XTS-XN4525-560kv-A
    Xnova brushless high performance outrunner motor designed for extreme 3D, 600-660mm blade size helicopter where highest power to weight ratio is important. It is a extreme power plant specially developed for the new SAB-black-thunder Goblin 650 helicopter. The 560KV version is a superb choice...
    $401.99
    $401.99
Show More

You may also like

Recently Viewed Products