FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.Application: For lipo batteries that have XT30 connectors to...

FURITEK high quality Futaba J Male is designed to support plug and play functionality of any Furitek Esc connection to any Receiver including scx24 stock all in one board. Application: for Receiver scx24 stock that have Futaba J Male connectors ready to use with TEGU...

EGODRIFT Tengu high-performance brushless motor for RC Heli are the result of one year of development and testing. The 4525HT Tengu comes with a kV rating of 550kV and fits all 700-800mm class helicopters, such as the XLPower Spectre 700, Goblin 700, T-Rex 700,...

G82198RX AMP30 2.4GHz 3 Channels Receiver (RX)

FURITEK high quality 2-to-3-pin jst to jst conversion cable is designed to support plug and play of LIZARD ESCs to motors. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.Application: for brushed motors that have 2-PIN Female...

FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors. Application: for lipo batteries that have XT30 connectors to...

FURITEK high quality JST-RCY to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc.  This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors. Application: For lipo batteries that have red JST-RCY...

MXO-RACING Micro Surface RX (Suitable for 1/72 and 1/87) Protocol: FLYSKY-AFHDA-2A Specification: Size: 10.0*12.5*2.5mm Work Volt: 3.3-5.0V Built-in 3A, Bidirectional ESC: Yes Num of light control channels: 7

MXO-RACING Micro Surface RX (Suitable for 1/72 and 1/87) Protocol: FUTABA-SFHSS Specification: Size: 10.0*12.5*2.5mm Work Volt: 3.3-5.0V Built-in 3A, Bidirectional ESC: Yes Num of light control channels: 7

MXO-RACING Micro Surface RX-G (Built-in GYRO, for 1/28 and 1/24) Protocol: KO-FHSS Specification: Size: 12.0*18.6*7.2mm Reaction Time: 3.85ms/7.7ms Work Volt: 3.7~8.5V Built-in GYRO: Yes GYRO Sensitivity and Direction SETUP: Yes EndPont: Yes

MXO-RACING Micro Surface RX-G (Built-in GYRO, for 1/28 and 1/24) Protocol: KO-ASF Specification: Size: 12.0*18.6*7.2mm Reaction Time: 4.1ms Work Volt: 3.7~8.5V Built-in GYRO: Yes GYRO Sensitivity and Direction SETUP: Yes EndPont: Yes

All RXC42-X Series Glue stick or ultrasonic welding 21.4*14.5*6.5mm

Features: - Using the newest Hall Sensor Technology- Blistering 0.035 Second Transit Speed- Dedicated Helicopter Rudder Servo- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Newly Design Steel Gear Train for Maximum Strength- Excellent Thermal Dissipation via Finned 6061 Aluminum Case- 8.4V...

Features: - Using the newest Hall Sensor Technology- Incredible Levels of Speed & Performance- Ultra Precise, High Resolution Control- Fully New Design Steel Gear Train for Maximum Strength- 8.4V High Voltage Ready- Optimized for Heli, Airplane & Jet Aircraft- 6 Ball Bearings Construction Speed: 0.07...

G82198 AMP 30 Transmitter & Receiver 2.4 ghz

The Booma-RC Certified Power Switch has been designed with Giant scale models in mind. The switch contains a printed circuit where the 4 pole switch is mounted. All wires are soldered to the circuit board not directly to the switch to give the highest...

Allows owners of Smooth Flite ARXL, Smooth Flite Spektrum, Smart Bus RRS ARXL to update to the latest version.  Requires loader version 1.2 or 1.3. Contact us for details if unsure. please note this product is NOT comptible with Smart Bus Extreme, Smart Bus Extreme...

Enjoy turning you model ON and OFF via the remote key FOB. This is great for a true scale model ap-pearance and will be a great conversa-tion piece at the field. To operate the Remote Smart Switch you simply connect the Remote receiver module...

Enjoy turning you model ON and OFF via the magnetic switch. Designed to be mounted inside your model. Its low profile design and light weight allows it to be mounted anywhere on the inside of the model. The Mag switch uses hall sensor effect...

The AR Reg Switch is the next level in regulator and switch design, small sleek and powerful. The Reg switch will take any battery type and regulate it down to 6.0v for your receiver and servos. *Also available in 5 volt and 7.2volt version...